1972 GMC Jimmy / Blazer / K5 4x4

1972 GMC Jimmy 4x4

This is a MAJOR project. But it does have a lot of good stuff with it.
LS1 with 700R4 not sure of the mileage. Tranny will need the adapter shaft installed for the transfer case (the kit for same with instructions is included). There is also an NP203 transfer case included. The axles are from the same truck as the engine and trans so that the gearing would match for the 700R4. The harness for the LS1 has already been professionally set up and is included.
All the doors and glass are included. The fenders, hood, and back hatch are all solid. The doors are fair and the back hatch for the top needs work - but is included (the top itself is in decent shape, no significant cracks). Seats are brand new and cost nearly $1,000. The left side rocker box is done, the right side still needs to be done. The floor was in great shape, but PO cut the floor board on the drives site to get to the rocker box - replacement piece is included. All other required sheet metal is included. Frame is clean, straight and solid and was blasted and is ready for paint.
I won't swear all the parts are there, but there are definitely extra dashes, heater boxes, wire harnesses etc. included.
I am working on getting the doors mounted etc. and should have that done next weekend. You will need a trailer to come get it because it doesn't have any steering or brakes hooked up. Again it's a major job so email me any questions before you bid.
The engine, engine mounts, transmission, seats and harness are well over $4,000 alone. Good luck- thanks!

• Condition: Used
• Make: GMC
• Model: Jimmy
• Type: SUV
• Trim: 4x4
• Year: 1972
• Mileage: 100000
• VIN: TKE182S503686
• Engine size: V8 350
• Number of cylinders: 8
• Transmission: Automatic
• Drive type: 4WD
• Vehicle Title: Clear
Want to buy? Contact seller!