1965 Ford Mustang Coupe ~ Pony Car

Price: - Item location: Granbury, Texas, United States
Description:

1965 Ford Mustang Coupe

1965 Ford Mustang Vin:5R07C206598 Project Car.

I purchased this Mustang October 2009 form a seller in CA. I got to the point of taking it apart and started putting it back together but I haven't touched it in months. The Mustang is a solid car with ALL parts included. New Transmission and engine. This Mustang is complete! I have the original listing from the previous seller. Lots of new parts included. This Mustang is now registered in Texas. Has a Clean title and has been garage kept since I've owned it in Texas. I have all records of this Mustang since second owner. Mustang was originally made in the San Jose Plant and was kept in CA before I bought it. All small parts, nuts and bolts are bagged and labeled. I have many pictures as I was taking it apart for catalog. I have more pictures upon request.

I can help with arranging with shipping, but those costs will be up to you. If you have questions please let me know.

Below is the previous seller Ebay post from October 2009:

Last updated on03:42:26 PM PDT,Oct 18, 2009

1965 Ford Mustang

Title:

1965 Ford Mustang Coupe ~ Pony Car

Mileage:

26,549 miles

Location:

Simi Valley, CA

Vehicle Information

VIN:

5R07C206598 | Get the Vehicle History Report

Warranty:

No

Vehicle title:

Clear

Condition:

Used

For sale by:

Private seller

Features

Body type:

Coupe

Engine:

8 Cylinder

Exterior color:

White

Transmission:

Automatic

Fuel type:

Gasoline

Interior color:

Other

Disability equipped:

--

1965 Mustang Coupe Warranty Number 5R07C206598. Built At The San Jose Plant April 06, 1965. Wimbledon White, Pony Interior. This is a super solid rust free Mustang with a huge lot of new parts including new rebuilt motor, new rebuilt C4 transmission. I bought this from a widowed neighbor with the intention to do a full restoration but lost my job and am forced to sell unfortunately. Her husband was the 2nd owner and bought this in 1971 here in town.Themileage I documented from receipts found in the car and found it is original. Some interior trim not pictured is complete and in great shape, the drivers seat back I removed to work on but only removed old cover, frame and listings are in great shape. Floor pans are solid, lower seat frame assemblies are in great shape. The passenger door has a small rust hole located in lower forward corner but included is a rust free door from a 1966 Mustang. The glass is all original and in incredible condition, there is no pitting or cracks.Ford OEMdash pad, steering wheel both great condition. Motor and new parts I'll list below.


Motor - The original 289 block was cracked and couldn't locate a good 289 core so I settled with a 302 block. The original crank was ground .10over and used in the build. The orginal rods had ARP rod bolts installed and resized .10 over and used in the build. Clevite 77 bearings and ARP main bolts were used. Mellings high volume oil pump & pickup were used. Flat top hypereutectic pistons with speed pro plasma molyrings were used. New cam bearings were installed. Cam installed is a new hydraulic flat tappet specs: .472 Int. .496 Ex. Advertised Duration 280 Int. 290 Ex. - Newhydraulic anti-pump lifters were installed.New Comp Cams roller timing set was used. Newbrass freeze plugs were installed as well.Heads - The original 289 heads were used. New brass guides & hardened seats were installed. Guides were cut for PC seals and rocker studs were pulled & tapped for screw in studs. ARP rocker studs were installed. All new valves were installed in head assembly. New Comp Cams Valve springs were installed for up to .550 lift and Crane valve locks were used. New Comp Cams pushrods & New Comp Cams Magnum Roller rockers were used. Brass freeze plugs were installed. ARP head bolts were used.

Edelbrock Performer RPM manifold with ARP bolts, New water pump with ARP bolts, Mallory Unilte Distributor with ARP bolt, Edelbrock Elite Valve covers with ARP studs, New Performance Products harmonic balancer with ARP fastener, Exhaust Manifolds (Not Pictured) have been bead blasted and black ceramic coated and look like new, Remanufactured Autolite Alternator ARP bolts used. High Performance ChromeAir Filter. ** Demon Carburetor in picture is not included.

Transmission - 1966 C4 Rebuilt With All New Clutches, Seals & Bands. Transgo 45-01 Reprogramming Kit installed. New Chrome Deep Transmission Pan Installed. New Dip Stick & Tube Not Installed. ACC "Boss Hog"2800-3000Stall convertor. SFI Flex Plate.

New Parts List:Door Seals, Cowl to hood seal, Trunk seal, Windshield seal, Quarter window verticle seals, Quarter Seals, Rear glass, Roof rail seals, Hood bumpers, Trunk bumpers, Door bumpers, Quarter extension seals, Body plug kit, Glove box bumpers, Inner fender splash shield kit, Bumper guard bumpers,Window felt kit, Fog light grommet,Parking light grommet, Under hood harnessstrap kit, Gas Line Grommet.

TMIFull Interior Kit-TMIDoor Panels & Water Shields- ACC Full Carpet Kit With Sound Backing - Sill Plates With '65 Ford Badge - WindlaceFor Entire Interior - Kick Panel Carpet Kit - Coat Hooks - DoorHandle EscutcheonKit - Upholstery Corner Cap Kit - Visor Arm Caps - NOS High Beam Cap C5ZZ-135373.

Reproduction Autolite Voltage Regulator, Ford OEM Front Lower Valance,(2) Door Springs, Bumper Bolt Kit, Radio Antenna, Trunk Mat,16G Gas Tank, Filler Tube & Gasket,Filler Hose & Clamp, Rear Tail Light Housings & Body Seals, Tail Light Lenses & Seals, Tail Light Bezels, Parking Light Housings & Seals, Parking Light Lenses & Seals,Outer Door Handle Kit, Quarter Panel Ornaments, Outer Side View Mirror, "289" Emblems, "Mustang" Emblems, "Horse" Emblems, Front Hood Letters, L.H. PonyInner Door Latch Assembly, FenderBolt Kit, Energy Suspension Poly Front End Bushings & Sway Bar Kit, Restoration Shop Wimbledon White Acrylic Enamel Paint

Not often can you find a '65 Mustangin the virgin untouched condition like this, never hacked apart by someone who had no business doing so or rusted out needing all metal replaced. Wiring harness is all there and all good, I think it was replace due to the nice condition but its all Fomoco parts. The Grill & Horns I had painted and look new, The Fog Light Bars & Lights are very nice all Fomoco the bulbs are BlueNOS GE correct part number. The Dash Pad Is OEM Ford but had to be dyed Aqua due to the color not being available OEM, The Gauges all work and look near new & steering wheel is very nice for the age. There is really too much to list and I'm sure that something was forgot. Title is clear and in hand, it is a California Black Plate car and I have both F&R plates. I will not ship but will help arrange and help any way possible to get it to you. If theres any questions don't hesitate to ask and thanks for looking.

** $500.00 Paypal Deposit Required Within 24 Hours Of Auction Closing

On Oct-16-09 at 06:09:33 PDT, seller added the following information:

I didn't realize until this morning that I missed posting pictures of the door panels, handles & stainless trims. Also missed the fog light & corral, please let me know if you would like to see these items before bidding and I'll send pictures in email since ebay wont let me add any wore pics due to having a bidder. Thanks.


From me:

$500.00 Paypal Deposit Required Within 24 Hours Of Auction Closing

Email me if you want more pictures or if you have any questions. Bid with confidence. I have 100% feedback.

Thanks,Nilza68