S52 E30 4 DOOR

1991 BMW 3-Series Sedan

S52 from a 99 E36 M3 ( owned by me), rebuilt around 120k and has maybe 130k on it now.
M50 Mani conversion
Complete AC system delete
Mishimoto Rad with reservoir piped and moved to passenger side.
Intake plumbed into the 318i fog light/brake cooling hole.
Markert Motorworks Tune (93) and OBD1 harness conversion.
Fulll Active Autowerks Exhaust from an E36 M3 modified to fit the E30 chassis and a small magna flow X muffler on back.
More motor work I'm forgetting but will run over with serious buyers.
Body/Chassis is a 1991 318i. Completely gutted and weighing in around 2300-400lbs with the swap. Fender flare all around and rear wells are slightly tubbed in for no rubbing with track/comp tires. Sunroof delete with lexan permanent cover. Also more work I'm forgetting that I'll run through with buyers.
Suspension is from previous owner but I believe it is a D2 kit. I modified the front to fit the Bilstein B8 performance inserts. Rear end has a full toe and camber adjustment installed. Front has camber plates with pillow ball and all that jazz. Every single bushing on the car except for I believe the front CAB(which are also new but stock) are all poly/delrin. Tons more tidbits I'm sure I'll remember soon.
Transmission is the matched 5 speed from the E36 M3. "Forever" Fluid changed maybe 3k miles with royal purple stuff. Stage one clutch from the PO of the M3, not sure which kit it was. Mount and shifter bushings are all poly/delrin. Diff is a Frankenstein 3.25 LSD from an E28 and E30, all rebuilt and new fluid etc.
Brakes are stock but all new, lines are SS all around. Never bothered to switch to 5 lug or a BBK because the cars so light it doesn't need it.
Wheels are Eurotek 16x8 and 9. Bought BNIB myself.
Tons and tons of work from 2 - 3 years I've had this car and been building including but not limited to -
Corbeau Seats and harnesses
Over built harness bar
Front and rear strut bars
Pflex sway bar bushings
External 4" tachometer
Dash controls removed and accessory and ignition switch installed
Washer fluid delete
Any parts ranging from the tie rods to nuts and bolts are all brand new, if the condition was unknown to me I just bought new and/or better parts and installed them. No corners were cut.
There's an Instagram account for the car @E30whatever
I have almost 300 pictures in a build album on Facebook that I'll link to people that are interested.
Car was featured in Bimmers Magazines E30 issue this summer.
I'm selling the car to fund a new interest that needs major funding but I do not have to sell it so don't bother low balling. 716-512-3168

• Make: BMW
• Model: 3-Series
• Type: Sedan
• Trim: Sedan
• Year: 1991
• Mileage: 130,000
• VIN: Wbaaj9312mej00990
• Color: Black
• Engine size: 3.2L M - S52
• Number of cylinders: 6
• Power options: Power Windows
• Fuel: Gas - 93 octane
• Transmission: 5 speed manual
• Drive type: Standard
• Interior color: Grey/black
• Vehicle Title: Clear
Want to buy? Contact seller!