1967 Ford Shelby Cobra FFR Factory Five Replica V8 302 MK 11 Roadster 5spd

Price: - Item location: Voorhees, New Jersey, United States
Description:

1967 Replica/Kit Makes Shelby Cobra Roadster MK 11 Cobra Shelby FFR

1967 Ford Shelby
Factory Five Racing MK 11
Roadster
Awesome Build Built By Backstreet Customs
Not a Backyard Build
Highest Quality Parts, mazing Fit And Finish!
302 V8 T-5

Frame:
Complete jig-welded original style tube frame. Setup with a Ford 302 V8.
• 3-point roll bar, owdercoated gloss Silver
• Chassis Painted Black

$2,000 Option independent rear suspension was added!


Body:
Hand laid 3/16” laminate composite body and panels made with vinylester resin.
• Driver and passenger doors with molded door liners and integral steel door frames
• Hood with molded hood liner, nd separate hood scoop
• Trunk with molded trunk liner and improved mount face for license plate light
• Includes secondary body fasteners
• Adhesive backed and foamweatherstrip
• C-channel door edge trim and fasteners
• Plastic end caps and body fasteners
• Trunk and engine bay seal, ush on rubber bulb seal
• Rubber hood and trunk bumpers
• Includes multi-adjustable door hinges with bronze bushings and fasteners
• Includes adjustable hidden trunk hinge kit, inge mount plates and fasteners
• Includes hood hinge kit with hydraulic piston supports and fasteners
• Original quick-jack comp bumpers with stainless steel sleeves and fasteners

Chassis Aluminum Panels:
6061-T6 aluminum panels for cock pit, runk, nd engine bay.
• Engine bay aluminum assembly with aluminum nose sections and splash guards

Front Suspension:
Unequal length A-arm control arms with coil-over shock suspension. Comes complete with all components and fasteners.
• KONI brand high-performancemono-tube, od-end shock absorbers
• Coil-over kit for KONI dampers including spring hat, hreaded seat and 500 lb. black powdercoated springs
• Adjustable upper control arms with ball joints and fasteners
• Lower tubular control arms with ball joints and fasteners

Rear Suspension:
IndependentRear Suspension Upgrade
• KONI brand high performance mono-tube, od-end shock absorbers
• Coil-over kit for KONI dampers including spring hat, hreaded seat and 350 lb. black powdercoated springs
• Factory Five tubular rear lower control arms with polyurethane bushings and fasteners

Brakes:
• SN 95 style spindles with integral upper ball joint mount and fasteners
• Front hubs, asteners and dust covers
• Front Brakes, ord Mustang GT 11” front rotors with twin piston calipers
•stainless braided brake lines front with mount clips, anjo bolts and brake line mounting fasteners

Steering System:
• 15:1 manual steering rack with inner and outer tie rod ends and fasteners
• Polyurethane steering rack bushings and fasteners
• Rack shaft adapter 9/16-26 spline
• Nickel plated lower steering shaft (fully welded U-joints)
• Collapsible upper steering shaft, ith friction washers
• 14” vintage wood and aluminum steering wheel with boss and FFR center section and fasteners
• Steering bearings and hardware, ncluding flange bearing, illow block bearing and fasteners

Complete Fuel System/Parts:
• OEM style fuel tank with mounting straps and hardware, ents, askets, ick-up and fuel level sending unit
• Fuel lines, onnectors, nd filler neck
• Pre-flared fuel lines (1/4” and 5/16”) with unions, arbs, ose clamps and high-press flex lines and fasteners
• Aston LeMans style polishedaluminum fuel cap with integralpressure cap, askets, round strap, uel hose to tank with fasteners
• 3/8” line, uel filter, nd connectors

Complete Cooling System/Parts:
• Electric cooling fan
• Aluminum radiator with cap andin-line filler neck
• Stainless overflow tank with cap, oses, ose clamps and mounting hardware
• 185 degree thermostat switch and wiring

Engine Accessories/Side Exhaust:
• 4-into-1 side exhaust, are steel with rubber hanger brackets, askets and fasteners
tubular headers
• Oil filter relocate mount with fittings
• Alternate drive pulley, pacer, ulley wheel and fasteners
• SB performance air filter, onical
• A/C replacement pulley kit and custom length fan belt with fasteners.
• Accelerator cable assembly: Includes the cable, eturn spring and retainer
• 28 spline 10.375” driveshaft

Gauges, ash, nd Electrical Assembly:
Integrated harness and electronic gauges are just the start of this massive assembly. Modern/performance gauges to complement an authentic street style dash. Covered aluminum dash, dash buttons, oggles and indicator lights, witches, nd horn.
• Padded dash cover, lack vinyl
• Custom fit chassis wiring harness
• Ignition switch with FFR keys, eadlight switch, hree-position turn signal switch, tarter solenoid and horns.
• Red, reen, nd blue dash lights
• On/off switch, orn button, lashers
• Trunk mount batter,

• Speedometer (not currently working?)
• Tachometer
• Oil Pressure Gauge
• Water Temperature Gauge
• Fuel Level Gauge
• Voltmeter
• Oil Temperature Gauge

Complete Interior Accessories:
Authentic style seats, oor latches,
toggles, ear view mirror, nd more complement the dash and gauges assembly for a full interior that is period correct.
• Authentic style roadster metal framed seats, lack vinyl with fasteners
• 5-point Simpson brand harnesses. 3” wide driver and passenger, rame mounted with fasteners
• Complete cockpit carpet set, lack all-weather
• Authentic interior rear view mirror with fasteners
• 7-piece electronic gauge assembly
• Original style door latches, asteners and leather check straps
• Authentic stainless shifter handle, hift knob, oot, olished ring and fasteners
• Authentic 14” wood and aluminum steering wheel, ith polished aluminum boss and small center badge

Exterior Accessories and Lighting:
Along with the goodies on the inside of the car
• Authentic chrome-on-brass vintage windscreen, inted with side bars and fasteners; DOT safety glass compliant
• Authentic style three-lock setincluding T-trunk handle, -shaped hood handles, atching keys, am wedges, asteners, atch pin sleeves and plastic end cap
• Authentic license plate light and bracket with fasteners
• Authentic style 3.5” Aston roller gas cap, olished cast aluminum with adaptor kit and all fasteners
• Competition hood pins
• High-quality laser-cut aluminum side louvers
• Ceramic FFR badging nose and tail
• Original style headlamp assemblies, ncluding buckets, alogen headlamps, rim rings, nd fasteners
• Original style British front amber turn signals, nd red rear tail-lights
• All lighting is DOT-approved
• Authentic bullet style sideview mirror

Complete Pedal Box and Components:
Wilwood brand pedal box
• Wilwood pedal box with adjustable pedals and mounting hardware
• Master cylinders, lutch quadrant, lutch cable, hreaded firewall adjuster
• Accelerator pedal, ccelerator cable, eturn spring and ball stud retainer, ith fasteners
• Brake line adapters and T-fittings

This 1967 Cobra Replica was completed in 2004. The build was done by Backstreet customs in NJ. The craftsmanship shows! Turn key car to enjoy and show. Amazing paint with only minor flaws occurred from over the years. Check out the photo's and ask questions.

Clear NJ Title. Titles as a 1967 Ford Cobra and is not branded as a kit car as most are!
Serious offers only please.

A $500 deposit requiredat endof auction end. PayPal, oney order, ash or Cashier's Check only . Car needs to be paid in full within7 days unless prior arrangements are made. Buyer to arrange and pay for shipping. I will assist with arrangements if needed. Car will not be released until funds have cleared.

THERE ARE OVER65 HDPHOTO'S BELOW. DEPENDING ON YOU DISPLAY FORMAT YOU MAY HAVE TO LOOK FOR A SECOND SCROLL BAR ON YOUR RIGHT TO VIEW THE PHOTO'S. YOU CAN ALSO CLICK ON ANY PHOTO TO VIEW MORE!