1970 Dodge Challenger R/T 440 6 Pack 4 Spd Resto Mod

Price: US $67,000.00 Item location: Ontario, California, United States
Description:

1970 Dodge Challenger RT 440 6 Pack

I personally built this car from the ground up for myself. This is an original California car and has always been here. The body retains all of the original sheet metal with the exception of the hood, front & rear valances, & center section of the trunk floor. NO expense was spared and everything was put together right. The motor was built by Bob Mazzolini Racing in Riverside CA. The carbs were rebuilt by Clark Holroyd in Chino CA. Engine was dyno tuned by Westech Performance Group in Mira Loma CA. Just look them up on the internet as they are all the best at what they do. Engine produces 536 HP / 540 Ft lbs Torque with 91 octane @ 34 degrees total timing. 4 Speed transmission was gone thru by Speedway Transmission in Ontario CA. Rear end is a rebuilt 8 ¾ with 3.23 gears and you can easily cruise down the freeway at 65 to 75 mph all day long. Car has Power Steering with a Borgeson box, 4 Wheel Disc Brakes with drilled & slotted rotors with working emergency brakes. Vintage A/C & heat, Aluminum dual fan radiator with dual temp control, Electric vacuum pump so the brakes always feel right. Completely new upgraded wiring harness through the entire car, NO old glass fuses or 50 yr old wiring. Complete 3" stainless TTI exhaust system with 2" ceramic headers & tips. New big block torsion bars & Xhd springs with all aspects of the steering and suspension rebuilt. Interior has new dash pad with custom Stewart Warner all electronic Phantom II Gauges. Sound deadening (DynoMat type) material from firewall to rear shelf including the roof. Seats were re-done with Legendary SE covers. All interior soft materials including the vinyl top were installed by Raul's Auto Trim in Ontario CA. Seatbelts are new 3 point shoulder / lap belts in front seats. Now for the body, color is correct E5 Rallye Red Urethane. Look closely at the pics and you can see everything on the body fits the way it should. I spent weeks HAND Blocking, car was blocked with 80 grit, 180 grit 240 grit then 400 wet. Car was painted then BLOCKED AGAIN & REPAINTED to get the laser straight finish you see. All stainless, chrome, pot metal & aluminum have been redone or replaced. I could go on & on about the 2 yrs that I spent almost every Saturday, evenings during the week, Sunday afternoons & holidays I put into this build. I have been doing these cars as a hobby for decades and I will say this is the nicest one as I built the car for myself and spared no expense to get it to the quality you see here.I have put about 370 miles on the car since I completed it over a year ago. It sits in my garage covered up so I feel it is time to let someone have it that will make use of it. One last thing, the performance of this car is well beyond what most would expect. This car will go sideways on you at speed when the outboard carbs come on. Performance is way, way beyond a stock built 440 6 pack. I have records & receipts for everything. You can't buy an e-body & build it to the level you see here for the selling price.

PLEASE call me @ 909 730 6055. Respectfully, I just don't have the time for texts or emails until we have spoken by phone. I will share shipping expenses or personally deliver the car depending on the distance. Let's talk.

If you can't come in person to see the car there are licensed vehicle appraisers around the area and I would suggest getting that second professional opinion. This is a high quality Resto Mod and I don't want it going to someone that will not be satisfied.

This vehicle is being sold as is, where is with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected the vehicle, and to have satisfied himself or herself as to the condition and value and to bid based upon that judgement solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this vehicle at the buyer's request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the vehicle.