2018 Run & Gun Cobra Style Car

1900 Shelby Cobra

What you get:

This is a Completely Assembled

2018 Run & Gun Cobra Style Car

When we say everything, we mean it. We include things like hood hinges and a

complete custom chassis wiring harness. We also make it easy for you to use

the engine of your choice with a variety of available headers and

engine/transmission mount assemblies.

Run & Gun Cobra Style Car Overview

Based on a 2018 Style. The Listing Year Was Put at 1900 only because any vehicle newer than 1981 needs to list VIN on Ebay but Engine, Frame, Chassisbased off donor

Way back in 1998, the editor of Grassroots Motorsport magazine, Tim Suddard, test drove one of

our street roadsters for his magazine. After having spent considerable time behind the wheel, Tim

mentioned what a fun and exciting open track car it would be.He

felt the FFR design could be taken to a higher level, and with a few changes, become an unbeatable

race car.

This simple idea, initiated by Tim at Grassroots motorsports magazine, gave birth to a two year effort

to design and optimize the roadster as a dedicated race-car. We ended up designing an “every

mans” race car. Perfect as a week-end “open track” weapon while at the same time configured for

wheel-to-wheel, or one-design spec racing.

By 1999 we had completed design work and began production on the “competition roadster”. In

light of the fact the the FFR Challenge Series had started, the car became known as the “Run&Gun”

model.

In July of 2000, Car and Driver Magazines called us up and asked if we would ship out a Run&Gun

Cobra Style Car for him to test. The car was on the truck a week later and headed for Ann Arbor. Car

& Driver editors tested the prototype Run&Gun Cobra Style Car at the Chrysler proving grounds a

few miles from their Ann Arbor offices.

Frame:

Modified Run&Gun chassis with full competition cage (NASA and SCCA legal), front and rear tubular

additions, and side impact tubing. Includes mounts ready to accept a wide variety of

engines/transmissions/suspensions.

• White powdercoating optional

Body:

Hand laid 3/16” laminate composite body and panels made with vinylester resin. Slots cut in body

for cage.

• Driver and passenger doors without molded door liners and non-functional hinges

• Hood with molded hood liner, separate hood scoop, and hood pins (hood hinge not available)

• Trunk with molded trunk liner

• Includes secondary body fasteners

• Adhesive backed and foam weatherstrip, C-channel door edge trim, and fasteners

• Carbon fiber rear body covers

• Plastic end caps and body fasteners

• Trunk and engine bay seal, push on rubber bulb seal

• Rubber hood and trunk bumpers

• Includes adjustable hidden trunk hinge Kit Car, hinge mount plates and fasteners

• Original quick-jack comp bumpers with stainless steel sleeves and fasteners

Chassis Aluminum Panels:

Includes 54 laser cut, pre-formed 6061-T6 aluminum panels for cock pit, trunk, and engine bay.

• 1,200 pre-packaged rivets; 1/8” and 3/16” short and long

• Complete RUN&GUN cockpit aluminum with optional block-off plates and covers

• Engine bay aluminum assembly with aluminum nose sections and splash guards

Complete Front Suspension:

Unequal length A-arm control arms with coil-over shock suspension. Comes complete with all

components and fasteners.

• KONI brand high-performance mono-tube, rod-end shock absorbers

• Coil-over Kit Car for KONI dampers including spring hat, threaded seat and 750 lb. black

powdercoated Competition springs

• Adjustable upper control arms with ball joints and fasteners

• Lower tubular control arms with ball joints and fasteners

• Forged steel spindles with integral upper ball joint mount and fasteners

• Competition front sway bar

• Competition adjustable bump steer Kit Car

Rear Suspension:

• FFR Deluxe 3-Link suspension Kit Car with rear-end brackets, upper link Kit Car, and fasteners,

including panhard bar Kit Car with rod-ends and grade 8 fasteners

• KONI brand high performance mono-tube, rod-end shock absorbers

• Coil-over Kit Car for KONI dampers including spring hat, threaded seat and 500 lb. black

powdercoated Competition springs

• Factory Five forged rear lower control arms with polyurethane bushings and fasteners

Brake Kit Car:

• Front hubs, fasteners and dust covers

• Front brakes, Ford Mustang GT 11” front rotors with twin piston PBR aluminum calipers, brake

pads and fasteners

• Master cylinders (listed in pedal box assembly), stainless braided brake lines front with mount

clips, banjo bolts and brake line mounting fasteners

• Pre-flared 3/16” brake line and brake line T-adapter

• Complete emergency brake handle assembly with leather boot and fasteners

Complete Steering System:

Complete steering system using 15:1 power rack from tie rod ends and fasteners to vintage steering

wheel and badges; collapsible design.

• 15:1 power steering rack with tie rod ends, hoses, and fasteners

• Polyurethane steering rack bushings and fasteners

• Rack shaft adapter 9/16-26 spline

• Nickel plated lower steering shaft (fully welded U-joints)

• Collapsible upper steering shaft, with friction washers

• 14” Competition steering wheel, black leather and aluminum with boss and FFR center section and

fasteners

• Steering bearings and hardware, including flange bearing, pillow block bearing and fasteners

Complete Fuel System/Parts:

Based on OEM style fuel tank and

system, this assembly provides everything from the gas cap to the lines, and is designed to work with

carbureted or fuel injected systems.

• OEM style fuel tank with mounting straps and hardware, vents, gaskets, pick-up and fuel level

sending unit

• Fuel lines, connectors, and filler neck

• Pre-flared fuel lines (1/4” and 5/16”) with unions, barbs, hose clamps and high-press flex lines and

fasteners

• Aston LeMans style polished aluminum fuel cap with integral pressure cap, gaskets, ground strap,

fuel hose to tank with fasteners

• 3/8” line, fuel filter, and connectors

• Optional race fuel cell cage

Complete Cooling System/Parts:

Electric cooling fan and mounting hardware, radiator hoses, and

fasteners.

• Electric cooling fan and mounting Kit Car

• Aluminum radiator with cap and in-line filler neck

• Radiator mount Kit Car and fasteners

• Stainless steel radiator hose Kit Car including adapter Kit Car, fasteners and hose

• Stainless overflow tank with cap, hoses, hose clamps and mounting hardware

• 180 degree thermostat switch and wiring

Engine Accessories/Side Exhaust:

The Run&Gun completed Kit Car is configured to accommodate the 5.0L, 4.6L, 5.0L Coyote, and

390/427 engines with exhaust options to use many other engines. Kit Car comes with alternate drive

pulley assembly, oil filter relocate Kit Car, and exhaust assembly to adapt

Mustang engine and headers to vintage side exit exhausts.

• 4-into-1 side exhaust, bare steel with rubber hanger brackets, gaskets and fasteners

• 1987-1995, 1996-2004, or Coyote straight pipes

• J-pipe header-to-side exhaust adapter, optional catalytic converter replaces this part. Full tubular

headers are also an available option

• Oil filter relocate mount with fittings, hoses, barbs and fasteners

• Spin-on engine block adapter

• Alternate drive pulley, spacer, pulley wheel and fasteners

• SB performance air filter, conical

• A/C replacement pulley Kit Car and custom length fan belt with fasteners.

• Optional full length tubular headers for: 302, 351, 390/427, and Coyote

• Optional catalytic converters for: ‘87-’95 302, ‘96-’04 4.6L

• Optional shorty headers with J-pipes for: 5.0L Coyote

• Driveshaft: Select from one of six available driveshafts with fasteners to match the engine/trans,

and rear end of your choice. Some of the available driveshafts:

- 28 spline 10.375” driveshaft for T-5 or Tremec 3550s

- 31 spline 10.375” driveshaft for Tremec TKO 500s or 600s

- 31 spline 12.875” driveshaft for 4.6L engines with T-45s or 3650s

Gauges, Dash, and Electrical Assembly:

End those wiring harness woes. Integrated harness and electronic gauges are just the start of this

massive assembly. Choose either vintage/replica or modern/performance gauges to complement an

authentic street style dash. Complete assembly comes with covered aluminum dash, dash buttons,

toggles and indicator lights, switches, and horn.

• RUN&GUN pre-cut aluminum dashboard with fasteners

• Padded dash cover, black vinyl

• Custom fit chassis wiring harness, wiring harness mounting Kit Car, and hardware includes fuse

panel mount

• Ignition switch with FFR keys, headlight switch, three-position turn signal switch, starter solenoid

and horns.

• Red, green, and blue dash lights

• Insulated line clip hardware and fasteners

• Cable ties, wire loom and flex grommeting

• On/off switch, horn button, flasher and all connectors

• Battery ground strap and competition battery cut-off switch

• Trunk mount battery hardware, cables and hold-downs with fasteners

• Speedometer sending unit, pigtail, fasteners and 3.55 speedometer gear

• Complete set of seven Autometer electronic gauges, with connectors, terminals and installation

Kit Car, which includes the following gauges:

- Speedometer (programmable)

- Tachometer

- Oil Pressure Gauge

- Water Temperature Gauge

- Fuel Level Gauge

- Voltmeter

- Oil Temperature Gauge

OR select optional complete set of seven vintage FFR

replica electronic gauges with connectors, terminals

and installation Kit Car, which includes:

- GPS Speedometer (reverse read)

- Tachometer

- Oil Pressure Gauge

- Water Temperature Gauge

- Fuel Level Gauge

- Voltmeter

- Clock

Interior Accessories:

The RUN&GUN-R Run&Gun Kit Car comes with

the competition interior accessories you need. Race seat, toggles, rear view mirror, and more

complement the dash and gauges assembly. Customer must add fire supresion system. Check out

this full list of standard parts and assemblies.

• Competition high-back aluminum seat (1, driver’s side) with fasteners

• 5-point Simpson brand harnesses. 3” wide driver only, frame mounted with fasteners

• Emergency brake boot, black leather

• Authentic interior rear view mirror with fasteners

• 7-piece electronic gauge assembly

• Authentic polished SS shifter handle, shift knob, boot, polished ring and fasteners

• 14” competition steering wheel (listed in steering assembly), with polished aluminum boss and

small center badge

Exterior Accessories and Lighting:

The RUN&GUN-R Competition Kit Car is loaded with the right parts on the outside.

• Competition tow hooks, front & back

• Authentic chrome-on-brass vintage windscreen, tinted with side bars and fasteners; DOT safety

glass compliant OR vintage driver’s side competition windscreen

• Authentic style three-lock set including T-trunk handle, L-shaped hood handles, matching keys,

cam wedges, fasteners, latch pin sleeves and plastic end cap

• Authentic license plate light and bracket with fasteners

• High-quality laser-cut aluminum side louvers

• Circle logo badges for nose and tail

• Original style headlamp assemblies, including buckets, halogen headlamps, trim rings, and

fasteners

• Original style front amber turn signals, and red rear tail-lights

• Lighting is DOT-approved

• Authentic bullet style sideview mirror

Complete Pedal Box and Components:

Leaving the Mustang pedal box behind, the complete RUN&GUN Kit Car utilizes the proven Wilwood

brand pedal box with fasteners and all the required ancillary parts

• Wilwood pedal box with adjustable pedals and mounting hardware

• Master cylinders, clutch quadrant, clutch cable

• Accelerator pedal, accelerator cable, return spring and ball stud retainer, with fasteners

• Brake line adapters and T-fittings

Oil Filter Relocater/Alternate Drive Pulley Assemblies:

An oil filter relocation Kit Car comes with all hoses and hardware. Other parts to help 302 EFI and

Mustang engine users include:

• Oil filter relocation mount with fittings, hoses, barbs and fasteners

• Spin-on engine block adapter

• Alternate drive pulley, spacer, pulley wheel and fasteners

• Air filter, conical

• Fan belt, six rib

Fasteners:

More than 1,500 top quality zinc plated, chrome and stainless steel USS and SAE fasteners,

numbered and packed individually by assembly

We will have:

A completedpackage from a A+++ Rated US Company

Procure crated V8 engine from blueprintengines.com,

Have Cobra Fully Assembled

Terms are $500 Immediate Non-Refundable Deposit

50% After 72 Hours, Final Balance Due Upon Delivery.

Complete Build will take 3-4 Weeks.

Allow 3-6 Weeks Delivery

Buy with confidence. We have been selling on Ebay for over 20YEARS and have a 100% Positive Rating!!!

Thank you for reading!

• Condition: Used
• Make: Shelby
• Model: Cobra
• Type: Sedan
• Year: 1900
• Mileage: 39,725
• VIN: 0000000000000
• Color: Red
• Engine size: V8 435 Hp
• Number of cylinders: 8
• Fuel: Gasoline
• Transmission: Automatic
• Drive type: RWD
• Interior color: Black
• Drive side: Left-hand drive
• Vehicle Title: Rebuilt, Rebuildable & Reconstructed
Want to buy? Contact seller!