1967 Pontiac Firebird Stored for 37 years All New 6.6 Liter Engine Parts

Price: - Item location: Katy, Texas, United States
Description:

1967 Pontiac Firebird

1967 Pontiac Firebird Stored for 37 years with All New never used Engine PartsSee Photos.

Story: This 1967 Pontiac Firebird with a Ram Air Hood, and 6.6 Liter Engine has been stored for 37 years, since 1986. In only drove it for a few months before the engine kept flooding. My mechanic friend and I tore into it to find that the cam lobes were absolutely flat. We blueprinted this engine to be very balanced for daily driving, but it rip when it needs to.

I took the engine apart and had it vatted and bored out .030 over and machined the Crank and and Heads. I then purchased everything you need to rebuild and create a high-performance engine: pushrods, high-performance cam, hydraulic lifters, bearings, connecting rods, domed pistons, rings, gaskets, high-performance intake manifold, and accessories like high-performance flex fan, low profile high-capacity oil pan, low profile air cleaner.

Long story short, life intervened and assembly was interrupted and I had to put her in storage.

My mother (RIP) had been paying for storage since 1989, when I went back to school. On her death bed, in 2003, she informed me that she had kept up with storage fees and it was still there. I thought it had lapsed years before.

I got it out of storage and began a budget for restoration, only to be laid off right when I had priced out and budgeted for the entire project and had started to prepare for bead blasting, and engine assembly.

Back in storage she went while I worked in California. Now I am back in Texas, and needing to downsize.

She comes with a copy of the original window sticker and original order form from the Pontiac Historical Society.

Original title. I was the 3rd owner of this vehicle, but it was never registered, under the second owner, nor me due to it being stored.

I have about $5,000 or $6,000 invested in engine parts alone which has never been turned over.

It will make an excellent project car.

Some assembly required.

Body: The body is in great shape. It has not been exposed to the elements since 1986.

The front end (quarter panels and Ram Air hood) is disassembled, as I was about to have it bead blasted to start the project. I have all bolts except the 2 main bolts to the carriage had to be cut off. Original radiator, fan cowl, hoses, etc.

Transmission: Pontiac 2-Speed Power Glide Transmission $600 Great transmission. Shifts into 2nd gear at 55-65 off the line.

Engine: Pontiac 400ci 6.6 liter engine from a 1976 Pontiac Firebird Trans AM (I looked up the block number and it is Confirmed)

I blue printed this engine and it has never been turned over/fired up. However, it WILL need to be vatted and re-assembled, just due to time. Perhaps a new set of piston rings.

I bought everything for the engine from JEGS, and listed their value if purchased today.

Block is bored out .030 over (never used since machining) $400 for machining

Heads were machined (never used since machining) $400 for machining

Crank Shaft was machined and appropriately sized bearings installed (never used) $130

New High Performance Domed pistons x8, I don’t remember the specs (never used) $600

New bearings (never used) $100

New Hydraulic Liftersx16 (never used) $200

New Pushrods (Chrome Moly) x16 (never used) $50

New Connecting Rods x8 (never used) $650

New Edelbrock Performer Aluminum Intake Manifold JEGS #350-2156 (never used) $410

New Milodon 7 Quart Low Profile Oil Pan Gold Anodized Needs a little vat job. (never used) $384

New Moroso Valve Covers Gold Anodized x2 (never used) $200

New Moroso 14” Low Profile Racing Air Filter Assembly Blue Anodized (never used Still in box) $120

New Moroso 68601 Aluminum T-Bar Wing Nuts x8 JEGS #710-68601 (never used Still in packages) $45

New Derale High Performance Stainless Flex Fan and Spacer (Blue and Silver) x8 JEGS #710-68601 (never used) $65

New Taylor SST 8mm Braided Wire Shielded Hi-Temperature Custom Fit Spark Plug Wire Set x8 (never used Still in box with decals) $90

New Moroso Spark Plug Wire Separators (Blue) (never used Still in package) $16

New Fel-Pro Engine Kit Full Gasket Set Pontiac V8 350, 400, 428, 455(never used Still in box except head and main gaskets which are already installed) $158

New Mr. Gasket Exhaust Gasket set x2 (never used Still in package) $35

New Taylor SST 8mm Braided Wire Shielded Hi-Temperature Custom Fit Spark Plug Wire Set x8 (never used Still in box with decals) $90

New Cam (installed) Blue printed to be great for everyday driving, yet ready to go when you step on the gas. I don’t remember the specs or brand, but it is VERY NICE!) (never used Installed) $170

New Headman Headers Aluminum Powder Coated (never used Still in box) $675

New Dash Installed just before I purchased this car about 1984, hasn’t seen the light of day since 1986. Looks Brand NEW! $120

Chevy Rally Wheels 15” x 6” x2 taken from 1968 Camero SS - Early version, which may have been from Corvette or Malibu ID # are not after 1968 and I can’t find exact match

Chevy Rally Wheels 15” x 7” x2 taken from 1968 Camero SS - Early version, which may have been from Corvette or Malibu ID # are not after 1968 and I can’t find exact match

Bonus Items:

2 Ton Engine Hoist Cherry Picker $350

Engine Stand $100

POSSIBLE BONUS on the following items if located before pickup of the car* but not guaranteed to be included in the sale:

New Braided Hose Kit with Blue Anodized Hose ends(never used) $132 If located.*

Original Quadrajet Carburator If located.*

Holley 600 4 barrel double pumper(I think) $720 If located.*

Pontiac to Chevy conversion plate for the 2 Speed Powerglide transmission. If located.*

*Notice: these POSSIBLE BONUS items are just that, POSSIBLE only if I find them before pickup of vehicle. They are not guaranteed to be included in the sale.

The winner of this auction will need to bring a pump and a trailer. I think the tires will still hold air, but be prepared.