1963 Land Rover Serie II A 109 Green 4WD Manual Station Wagon with Tropical Roof

Price: US $95,000.00 Item location: Forestville, California, United States
Description:

1963 Land Rover Serie II A 109 Station Wagon with Tropical Roof

This 1963 Land Rover Series IIA 109 station wagon is a classic vehicle with a clean title and 24850 miles on the odometer, however true mileage is unknown. This car is a perfect addition to any collection. The green exterior is in excellent condition, and the owner has taken great care to keep the car looking its best. The Land Rover runs great and is perfect for weekend drives. Whether you're cruising down the highway or exploring off-road trails, this car is up for the task. Don't miss your chance to own a piece of automotive history with this stunning 1963 Land Rover Series IIA 109 Station Wagon.

Vehicle Details

Vehicle is equipped with the tropical roof with vents, fairey overdrive, fairey locking front hubs, 19 gallon fuel tank, adjustable driver seat, folding second row seats, sliding windows, windscreen ventilators, oil bath cleaner.

I purchased this vehicle as a project in June of 2015 and began a multi year process of restoring the vehicle from the frame up. I completely disassembled the vehicle down to the frame. The vehicle was finally assembled and roadworthy as of May 2023. I have since put approximately 700 miles on the truck.

I attempted to keep the vehicle as original as possible. I have receipts for approximately $32k in parts and some labor. I have hundreds of hours of my own time into the project which I have thoroughly enjoyed. I have other projects and not enough space so I’ve decided to sell this truck.

I’ve used stainless steel hardware throughout and grade 8 hardware on the frame/engine. New exhaust was installed prior to my ownership.

The body, roof and wheels, were completely disassembled and sandblasted to bare metal then powder coated pastel green (RAL 6021) and the roof and wheels were powder coated oyster white (RAL 1013). The interior parts were powder coated black. The work was done by Miller Powder Coating.

The frame was coated in a protective coating prior to my ownership. The driver side rear tub shows minimal exterior damage, which occurred prior to my ownership and was left as is.

The truck will easily drive 65+MPH on the freeway, however I find it best under 60 MPH. She gets lots of attention wherever she goes. All of the oils have been changed.

The following parts were restored and/or replaced:

- Brake/Clutch -

Work completed April 2023 by British European Motors.

All of the brake pistons front and rear have been replaced.

Rear backing plates

Snail cams

Brake master cylinder

Emergency brake

All brake hoses

Brake shoes front & rear

Turned front drums, new rear drums

Brake lines

Clutch slave cylinder

Clutch master cylinder

Hydraulic brake light switch

Clutch and brake fluid reservoir

Pipe from reservoir to brake and clutch master cylinder

-Tires/Wheels-

Five Michelin 7.50x16 XZL tires

Five steel 16” wheels

Bonnet tire rubber mounts

9/16 BF stainless steel wheel nuts by Wrington Engineering

-Suspension-

Leaf spring suspension kit (Atlantic Brisith) Hardware

Check straps

Bump stops

Chassis bushings front & rear

-Steering-

Ball joints

Stainless steel clamp track rod ends

Steering box restored (Dare Britannia Ltd.)

Sealing pad for steering column

Original banjo steering wheel with leather cover.

Horn cover (Dare Britannia Ltd.)

-Body-

Defender type driver side view mirror

Bulbs

Dash vent seals

Rear hubcaps

Front galvanized bumper

Rubber boot kit for interior

Re-galvanized body parts (pacific galvanizing)

RH wing splash guard

Body & roof seals

Stainless steel hinge pins for ventilators

Windscreen seals

Glass seals and window channels

Door latches and lock assemblies

Alpine glass

Rear door glass (heated- not currently wired)

Door glass

LR mud flaps

Stainless steel hinges on doors

Wiper blade arms and wipers

Stainless steel wiper arm to windscreen brackets

All door seals

- Engine -

Flush & paint radiator (Dutton Radiator)

Engine bay decals

Water pump

Thermostat

Radiator hoses

Fan belt

Air intake hose

Plug wire set

Spark plugs

Radiator cap

Cloth strip for bonnet

Ignition coil

Hi-Torque starter motor

Zenith carb (repo)

Oil filter adapter- spin on

Coolant overflow hose

Valve exhaust, valve inlet, valve guide exhaust, valve guide inlet, exhaust valve guide seat insert (Turner Engineering)

Head gasket

Exhaust manifold gasket

Exhaust manifold hardware

Genuine NOS push rods x8 (Pangolin 4x4)

Valve springs genuine (pangolin 4x4)

Block was rebuilt - resurfaced, valve job, seats (Selby & Son Machine inc.)

-Interior-

Rebuilt gauges (Nisonger Instruments)

Restored Lucas wiper motors (Dare Britannia Ltd.)

Oil/Water Temp LR dual gauge

Aux. gauge panel

Exmoor floor mats front & second row

Exmoor elephant hide vinyl seats

Exmoor door cards

Exmoor charcoal canvas panel set

Rubber pedal pads

Galvanized door pulls

-Fuel-

Flushed, lined and painted fuel tank

Fuel gaskets

Filler hose

Fuel tank to fuel pump line

Fuel sender

Fuel pump

Locking hasp fuel cap

Fuel pump line to carb

-Electrical-

Wiring harness w/ alternator conversion (British wiring)

Fuse box, fuses

45amp alternator

Alternator pulley and adapter

LoNote horn

Headlamps (Hella vision HB2)

Headlamp bowls

Amber glass turn signals

Clear glass side markers

Red glass stop lamps

Rear lic. Plate assembly

Starter switch

Battery

Battery bracket

Flasher unit

Turn signal stock

Distributor

-Misc.-

Wavian 20L red Jerry can with front loading holder

Galvanized roof access ladder

Starting handle

LR radiator muff

Expedition shovel & front wing mount kit

Stainless steel series foldable cup holder

Snorkel kit (not installed)

Hi-Lift Jack & holder

Workshop manuals and misc. pamphlets