1948 International Harvester KB5 Railway Express - BiDnBuY - Cornbinder - ratrod
1948 International Harvester KB 5
Green IH Montana Barn Find 12 foot box - Survivor – BiDnBuY
1948 International Harvester K B 5 dual rear wheel, at some point the engine was replaced with a more modern BG241 Int'l I-6 with manual trans. I have 2 bumpers, 2 valence trays, iron grill guard headlight buckets, hood emblems, embellishmentsand extra stainless grille parts. I'm sure that you will want to repair and/or replate some or all of the trim pieces. There is a white gasoil heater behind the stand up driver's seat partition, a swing davit just inside the passenger side rear door, diamond plate steel floor, very little rust on the bottom of the front fenders. Bent pipe racks and rails have been added to the interior for the last owners service station supply business... these can be easily removed. A great candidate for a restoration or resto-mod or even hot rod. Last titled and licensed in Western Montana in 1970's. No title but will assist with getting one and I've got a new data plate that is included. I bought from an estate with notarized bill of sale and can provide you with same. I can assist you to arrange open trailer transport to your location. Your bid acknowledges the above facts.
You may call to get specific questions answered, propose tradesor to request additional pictures. No reserve and all reasonable Best Offers will be considered and responded to in a timely manner. Good luck and thanks for your interest.
SPECIFICATIONS
INTERNATIONALMODEL
KB-5
Gross Vehicle Weight Rating 13,500 to 17,500 lb.
(Gross vehicle weight rating depends upon the type of terrain,
road speeds, method of loading, nature of loads, gear shifting,
etc.This is controlled by the International Harvester point
system of rating motor trucks.)
Chassis Dimensions:(in inches)Weights:(in pounds)
Wheelbase (WB)135147159177195
Overall length, with front
bumper (OAL)21% 235% 247% 265% 307^
Back of cab to c/1 of rear
axle(CA)607284102120
C/1 of rear axle to end of
frame (AF}4456565680}/8
Back of cab to end of frame
(CF)104128140158200^
Bumper to center of front
axle(BA)32%32%32%32%32%
Turning radius with bumper clearance (feet)....2426283134
Chassis weight, including
fuel, oil, and water (approximate)3,7053,7703,8153,8653,940
The following dimensions (with 7.50-20 tires) are the same
for all wheelbases:
Tread- —front wheels, 58^2 in-; rear wheels, 66}-^ in.
Clearance under front axle, 12^ in.; under rear axle, 9% in.
Overall width- —front, 74 in.; rear, 85^ in.
Height from top of frame to ground, loaded—-front, 27% in.;
rear, 29 % in.
Frame:Pressed steel channel.135-in.w.b.,8 x % x 3 in.;
147-in. and 159-in. w.b., 8^x%x3^ in.; 177-in. and 195-in.
w.b., 8% x 14i x 3^ in.
Engine,GreenDiamond233:Six-cylinder,cast-in-block,
L-headtype;3->f6-in.bore,4J^-in.stroke.Displacement,
233 cu. in.; compression ratio, 6.3.A.M.A. rating, 26.3 h.p.;
maximum brake h.p., 93 at 3,400 r.p.m.Maximum torque,
181lb.-ft.at1,000r.p.m.Foursteel-backed,replaceable-
shell,precision-typemainbearings;totalprojectedarea,
16.24 sq. in.Six replaceable-shell, precision-type connecting-
rod bearings.Exhaust-valve seat inserts.
Lubrication: Full-pressure feed to all main, connecting-rod
and piston-pin bearings, camshaft and timing chain. Gear-
type, gear-driven oil pump.Oil capacity, 53^ qt.
CoolingSystem:Centrifugalpumpcirculation,fin-and-tube
radiator.Pump driven by V-type fan belt.Capacity, 14 qt.
Ignition:6-volt, vacuum control, full-automatic distributor.
Generator:30-ampere, 200-watt, shunt-wound, belt-driven.
Lights:Sealed-beam headlights.
Battery:6-volt, 15-plate.
Starting Motor:6-volt.
Carburetor:Downdraft type. Oil-bath-type air cleaner.
Fuel System: Fuel pump. 18-gal. tank inside frame. Gasoline
filter.
Clutch:10-in., single-plate, with vibration damper.
Transmission: 4 speeds forward, 1 reverse; sliding-gear,
selective-type, mounted in unit with engine.
Transmission Reductions: First, 6.4 to 1; second, 3.09 to 1;
third, 1.69 to 1; fourth, 1 to 1; reverse, 7.82 to 1.
Propeller Shaft: Large-diameter heavy steel tubing. 2-piece
shafts with self-aligning center bearing.
Universal Joints:All-metal, roller-bearing, anti-friction type.
Front Axle: Drop-center, I-beam, heat-treated steel drop-
forging. Fore and aft steering hook-up, tie rod at rear for
protection.
Rear Axle: Full-floating, spiral-bevel gear type. Hotchkiss-type
final drive. Chrome-molybdenum steel axle shafts. Heat-
treated, one-piece, tubular banjo-type steel housing. Differential
and wheel bearings are tapered rollers. Pinion, straddle-
mounted on roller bearings.
Axle Reductions:5.28 to 1; 6.166 to 1; 6.66 to 1; 7.16 to 1.
Axle Reductions (Two Speed): 5.14 to 1—7.15 to 1; 5.83 to 1—
8.11 to 1; 6.33 to 1—8.81 to 1.
Steering Gear:Cam-and-twin-lever type.
Brakes: Service: 4-wheel, hydraulic, internal-expanding, two-
shoe, double-anchor type. Hand: Propeller-shaft type, mounted
back of transmission.
Springs: Semi-elliptic. Front, 2 x 42 in.; rear, 1Yi x 46 in.;
auxiliary, 2l/i x 30 in.
Wheels:Malleable iron, spoke type.
Tires:6.50-20 front and dual rear.
Controls: Throttle, light, and choke controls on instrument
panel. Accelerator, clutch, and service brakes operated by
pedals. Control levers located in center of driving compartment.
Standard Equipment: Flat-back cowl and dash; underslung tire
carrier; spare rim; sealed-beam headlights; combination tail
and stop lights; air cleaner; auxiliary rear springs; jack and tools.
Special Equipment: The following will be available at extra
cost when specified on order: Cab; extra windshield wiper;
optional tires, single front and dual rear; hydrovac booster
brake; 300-watt generator; two-speed axle with power shift;
auxiliary fuel tanks; oil filter; governor; increased cooling;
increased capacity brakes and propeller shaft guard and
emergency brake shield for school bus chassis.
Finish: Frame and wheels, black. Grille, hood, cab, and
fenders, optional colors—No. 10 dark green, No. 50 red, No. 22
maroon or No. 60 black.
Specifications subject to change without notice.
Title | KB-5 |
Object Type | International Truck Specifications |
Language | English |
Source | International Truck Specifications -- KB Line -- 1947-1949 |
Page Number | 1 |
Electronic Publisher | Wisconsin Historical Society |
Physical Description | 8.5 x 11 inches |
Electronic Publication Date | 2011 |
Year | 1948 |
Date | 1947-1949 |
Rights | Copyright 2011 by the Wisconsin Historical Society (Madison, Wisconsin) |
Full Text | SPECIFICATIONS INTERNATIONAL MODEL KB-5 Gross Vehicle Weight Rating 13,500 to 17,500 lb. (Gross vehicle weight rating depends upon the type of terrain, road speeds, method of loading, nature of loads, gear shifting, etc. This is controlled by the International Harvester point system of rating motor trucks.) Chassis Dimensions: (in inches) Weights: (in pounds) Wheelbase (WB) 135 147 159 177 195 Overall length, with front bumper (OAL) 21% 235% 247% 265% 307^ Back of cab to c/1 of rear axle(CA) 60 72 84 102 120 C/1 of rear axle to end of frame (AF} 44 56 56 56 80}/8 Back of cab to end of frame (CF) 104 128 140 158 200^ Bumper to center of front axle(BA) 32% 32% 32% 32% 32% Turning radius with bumper clearance (feet).... 24 26 28 31 34 Chassis weight, including fuel, oil, and water (approximate) 3,705 3,770 3,815 3,865 3,940 The following dimensions (with 7.50-20 tires) are the same for all wheelbases: Tread- —front wheels, 58^2 in-; rear wheels, 66}-^ in. Clearance under front axle, 12^ in.; under rear axle, 9% in. Overall width- —front, 74 in.; rear, 85^ in. Height from top of frame to ground, loaded—-front, 27% in.; rear, 29 % in. Frame: Pressed steel channel. 135-in. w.b., 8 x % x 3 in.; 147-in. and 159-in. w.b., 8^x%x3^ in.; 177-in. and 195-in. w.b., 8% x 14i x 3^ in. Engine, Green Diamond 233: Six-cylinder, cast-in-block, L-head type; 3->f6-in. bore, 4J^-in. stroke. Displacement, 233 cu. in.; compression ratio, 6.3. A.M.A. rating, 26.3 h.p.; maximum brake h.p., 93 at 3,400 r.p.m. Maximum torque, 181 lb.-ft. at 1,000 r.p.m. Four steel-backed, replaceable- shell, precision-type main bearings; total projected area, 16.24 sq. in. Six replaceable-shell, precision-type connecting- rod bearings. Exhaust-valve seat inserts. Lubrication: Full-pressure feed to all main, connecting-rod and piston-pin bearings, camshaft and timing chain. Gear- type, gear-driven oil pump. Oil capacity, 53^ qt. Cooling System: Centrifugal pump circulation, fin-and-tube radiator. Pump driven by V-type fan belt. Capacity, 14 qt. Ignition: 6-volt, vacuum control, full-automatic distributor. Generator: 30-ampere, 200-watt, shunt-wound, belt-driven. Lights: Sealed-beam headlights. Battery: 6-volt, 15-plate. Starting Motor: 6-volt. Carburetor: Downdraft type. Oil-bath-type air cleaner. Fuel System: Fuel pump. 18-gal. tank inside frame. Gasoline filter. Clutch: 10-in., single-plate, with vibration damper. Transmission: 4 speeds forward, 1 reverse; sliding-gear, selective-type, mounted in unit with engine. Transmission Reductions: First, 6.4 to 1; second, 3.09 to 1; third, 1.69 to 1; fourth, 1 to 1; reverse, 7.82 to 1. Propeller Shaft: Large-diameter heavy steel tubing. 2-piece shafts with self-aligning center bearing. Universal Joints: All-metal, roller-bearing, anti-friction type. Front Axle: Drop-center, I-beam, heat-treated steel drop- forging. Fore and aft steering hook-up, tie rod at rear for protection. Rear Axle: Full-floating, spiral-bevel gear type. Hotchkiss-type final drive. Chrome-molybdenum steel axle shafts. Heat- treated, one-piece, tubular banjo-type steel housing. Differential and wheel bearings are tapered rollers. Pinion, straddle- mounted on roller bearings. Axle Reductions: 5.28 to 1; 6.166 to 1; 6.66 to 1; 7.16 to 1. Axle Reductions (Two Speed): 5.14 to 1—7.15 to 1; 5.83 to 1— 8.11 to 1; 6.33 to 1—8.81 to 1. Steering Gear: Cam-and-twin-lever type. Brakes: Service: 4-wheel, hydraulic, internal-expanding, two- shoe, double-anchor type. Hand: Propeller-shaft type, mounted back of transmission. Springs: Semi-elliptic. Front, 2 x 42 in.; rear, 1Yi x 46 in.; auxiliary, 2l/i x 30 in. Wheels: Malleable iron, spoke type. Tires: 6.50-20 front and dual rear. Controls: Throttle, light, and choke controls on instrument panel. Accelerator, clutch, and service brakes operated by pedals. Control levers located in center of driving compartment. Standard Equipment: Flat-back cowl and dash; underslung tire carrier; spare rim; sealed-beam headlights; combination tail and stop lights; air cleaner; auxiliary rear springs; jack and tools. Special Equipment: The following will be available at extra cost when specified on order: Cab; extra windshield wiper; optional tires, single front and dual rear; hydrovac booster brake; 300-watt generator; two-speed axle with power shift; auxiliary fuel tanks; oil filter; governor; increased cooling; increased capacity brakes and propeller shaft guard and emergency brake shield for school bus chassis. Finish: Frame and wheels, black. Grille, hood, cab, and fenders, optional colors—No. 10 dark green, No. 50 red, No. 22 maroon or No. 60 black. Specifications subject to change without notice. |
- Condition: Used
- Make: International Harvester
- Model: KB 5
- Type: Frieght Body - Steel diamond plate floor
- Trim: Sliding doors - Railroad Express Van
- Year: 1948
- Mileage: 56,000
- VIN: 119 196
- Color: Green and Brown
- Engine size: BG241 6 cylinder
- Number of cylinders: 6
- Fuel: Gasoline
- Transmission: Manual
- Drive type: DRWD
- Vehicle Title: Clear Want to buy? Contact seller!