Jim Farley's 1932 FORD ROADSTER The 'V8 Flyer' Original FORD Body/Chassis/Motor!

1932 Ford Other Jim Farley's 'V8 Flyer'

1932 Ford Roadster fanatics, here is a once in a lifetime opportunity to acquire a very special machine!
‘Red Hills Rods & Classics’ is proud to offer you Jim Farley’s 1932 Ford Roadster, which made its debut @ the Grand National Roadster Show, and was a finalist in the 'America's Most Beautiful Roadster' (AMBR) event. Jim commissioned Dave Simard and the crew @ East Coast Customs to build the ‘Deuce Roadster’ of his dreams, but it had to be an authentic Hot Rod based on a ‘real’ body & frame manufactured by Ford in 1932. His vision ensured that it would be as unique as it was traditional. Farley’s lifelong interest in American motorsports coupled w/ his position as Ford Motor Company’s head of Global Marketing, along w/ the fact that the Farley family’s connection to Ford goes back generations, set the tone for the Indy-inspired Deuce Highboy that you see here. Farley is a dyed-in-the-wool Ford guy, and in fact, his grandfather was one of Henry Ford’s first employees! This spectacular Roadster, dubbed the ‘V8 Flyer’, showcases the very best of Ford’s past & present engineering. Jim’s idea stemmed from his lifelong interest in racing and motorsports, as well as his passion for traditional Hot Rod craftsmanship and evolving racing technology, which are both apparent in this Deuce Roadster. Jim envisioned a ’32 Roadster that could have been built by a talented Indy 500 crew chief in the late 50’s, a car that would have many of the same design & engineering elements that appeared on Frank Kurtis, AJ Watson, Quinn Epperly, and Lijie Lesovsky Roadsters. Features such as torsion-bar suspension, hairpin wishbones, disc brakes, Halibrand wheels, and a race-inspired engine would figure into Farley’s new creation. The Roadster had to run cool, handle well, stop like a modern car, but still stay true to the build theme. For the entire story behind this amazing build, this Deuce Roadster is featured on the front cover & described extensively over 16 pages in the ‘Rodders Journal’ # 59.
A short list of just some of the build features include:
BODY: all-original 1932 Ford steel body (completely metal finished), metal crafted 4-piece hood, grille shell, aluminum rolled rear pan, custom chopped & slightly curved windshield frame, front & rear nerf bars, raised trunk floor, restored Guide 682C headlights, and modified ’39 teardrop taillights w/ crossbars.
PAINT: custom-mixed pre-war Alfa Maroon done by Kevin Olsen @ Viking Auto in Vernon Vermont.
CHASSIS: original 1932 frame rails w/ modifications by East Coast Customs, front pinched 3”, frame horns removed (front & rear), rear-end C-notched & raised, frame rails reinforced w/ 1/8” internal rails, front torsion bars installed in frame rails & boxed, rear torsion bars installed w/ custom-built cross members, custom front cross member mounts shocks & provides mount for radiator, custom tubular crossmember w/ floor-mounted clutch & brake pedals, clutch actuation completely mechanical w/ custom bell crank, custom oval openings in frame fabricated to accommodate exhaust exiting both sides, 1937 Ford tube axle fitted w/ modified 1932 Ford spindles, custom-built torsion arms, custom fabricated radius rod brackets w/ integral torsion arm connection, custom torsion links, hairpin radius rods & Schroader torsion bars, 12” Wilwood 4-piston disc brakes, modified Schroader Sprint-car steering w/ custom bell crank mounted inside cowl, Halibrand quick-change rear-end w/ 9” Ford axles, custom ladder bars & axle brackets, custom torsion bar links, 1937 Ford rear shocks, & custom panhard front & rear.
DRIVETRAIN: Factory Ford Racing 4.6 L DOHC V8 (280ci 4-valves per cylinder 10.4:1 compression), hand-crafted one-off aluminum valve covers, complete custom twin V-belt drive for Powermaster PowerGen alternator & fan, crankshaft driven tach drive (rare), custom-built electronic fuel injection manifold completely hidden below an original 1955 Hilborn DeSoto mechanical fuel injection system, custom-built one-off steel tube-headers, custom cast valley pan incorporating the ‘Farley’ logo into the pan, & Tremec close-ratio 5-Speed transmission. Many of the components on this motor were hand-built from scratch, which just adds to the uniqueness of this Roadster.
INTERIOR: custom purpose-built bucket seats wrapped in Saddle Tan leather done by Steve Pierce @ One Off Technologies, original vintage Stewart Warner gauges restored by Instrument Specialties, custom-built tachometer & speedometer by Pat Swanson, satin nickel-plated dash insert which was carefully drilled & engine turned, modified ’40 Ford steering column, leather wrapped custom 3-spoke steering wheel, black rubber floor mats, and custom wiring by Skip Readio.
WHEELS/TIRES: Authentic magnesium Indy-roadster wheels (18” in the rear & 16” up front) by Real Rodders in Ventura, California, wrapped w/ Dunlop Racing tires (7.00 x 18 in the rear & 5.50 x 16 up front).
Again, this is just a very short list of the extensive work performed by East Coast Customs to create Jim Farley’s ‘V8 Flyer’. To say that Dave Simard and his crew hit it out of the park is a gross understatement. This is a one-off, period-correct, and highly unique ‘Deuce Roadster’ that will stand the test of time, period. It has been recognized & praised by many of the top Hot Rod builders in the country. It is not often that a car of this stature becomes available to the public, so if you have been searching for that special Hot Rod for your high-end collection, Jim Farley’s 1932 Ford Roadster is going to be very hard to beat!

• Condition: Used
• Make: Ford
• Model: Other
• SubModel: Jim Farley's 'V8 Flyer'
• Type: --
• Trim: Jim Farley's 'V8 Flyer'
• Year: 1932
• Mileage: 0
• VIN: 1891043
• Color: Alfa Maroon
• Engine size: Ford Racing 4.6 L DOHC V8
• Power options: --
• Fuel: Gasoline
• Transmission: Manual
• Drive type: --
• Interior color: Tan
• Options: --
• Vehicle Title: Clean
Want to buy? Contact seller!