1967 Ford Mustang Coupe project

1967 Ford Mustang

1967 FORD MUSTANG Coupe
PROJECT
from
MustangBeginnings

If you have ever wanted a 67 Mustang Coupe project that was affordable, This is the car! It would make a great Father and Son or Daughter project.

The engine is in the car. You could probably get it running, but it would still need probably need rebuilding. Same for the carburetor and distributor. Call us if you need a different engine or transmission, no problem we have most kinds, and are available separately at very reasonable prices.

Not sure of the original color, probably red, but you can paint it any color you like.

We have included some pictures of other Mustangs at the end of the photos below showing how the car might look when finished.

In 1967, Ford built an entirely new frame and body for the Mustang. The 67 Frame having more room in the engine bay will accept any of the engines you might want to consider including 289. 302, 351 or even a 390 big block. Ford's strategy worked—selling more Mustangs than ever before.
When fully restored, this car will easily sell for $15,000 or more.

BODY:
The floors will need to be patched or replaced, but the frame is straight and strong. Both quarters have a bit of bondo but are easily fixed, and we can coach you through the process. Overall this Mustang is a great candidate for restoration.

INTERIOR:
The interior will need a little work, but not much, and it is really the easiest part of the restoration. The good news is that you can see what is needed. You aren't accepting someone else's mistakes or bad repairs.
All the wiring, instrument panel, seats, etc. will come with the car but will need to be restored.
Both seats will need to be reupholstored, and we can sell you anything you need for redoing the interior. The door panels and dash pad are included, but you will probably want new ones if you are going for concourse condition.

ENGINE BAY:
Engine bay is in great condition. The original numbers matching engine and automatic transmission are still in the car. You should plan on having the engine rebuilt to accept modern unleaded gas. If you want to upgrade, a 302 or 351 Windsor will drop right in, and the original engine can be used as a core.

Please contact us separately for recommendations on where to find the engine you want.

BRAKE SYSTEM:
The mustang has front and rear drum brakes. They are intact and complete. If you would rather have front disk brakes, we can add those for $1,000.

GLASS:
The coupe will come with all its glass but you will need a new windshield, nicks or scratches which can be fixed or replaced.

MISC.
The Mustang comes with everything shown in the pictures, and most all of its parts. We can help you with any parts you may want to replace.
At MustangBeginnings we are here to help you make your restoration a success.

WE HAVE 100% POSITIVE FEEDBACK AND PLAN TO KEEP IT THAT WAY! THERE ARE NO SURPRISES HERE, I ENCOURAGE ALL THOSE WHO BID TO COME SEE THE CAR FIRST IF POSSIBLE OR SEND SOMEONE HERE TO INSPECT IT. WE HAVE COMPLETED OTHER 67 MUSTANGS AND KNOW WHAT IT TAKES TO COMPLETE THIS CAR. THIS IS A GOOD CAR TO START WITH. PLEASE REMEMBER THIS IS A 67 MUSTANG THAT NEEDS TO BE REBUILT INTO SOMETHING SPECIAL.
AGAIN, WE STRONGLY ENCOURAGE ALL BIDDERS TO CHECK THE CAR OUT IF POSSIBLE THAT WAY THERE ARE NO MISUNDERSTANDING, MISTAKES, MISCOMMUNICATION, AND ALL THE OTHER MISES.
THE CAR MIGHT NEED THINGS WE DID NOT LIST BUT THE MAJOR ONES HAVE BEEN LISTED. WE PUT THE WORD "PROJECT" IN THE DESCRIPTION TO COVER ANYTHING WE MIGHT HAVE NOT SEEN. WE HAVE THE CAR FOR SALE LOCALLY AND RESERVE THE RIGHT TO END AUCTION EARLY.

• Make: Ford
• Model: Mustang
• Type: Coupe
• Year: 1967
• Mileage: 56470
• VIN: 7T01T172230
• Color: Red
• Engine size: 200 1bbl 6-cyl
• Number of cylinders: 6
• Fuel: Gasoline
• Transmission: Automatic
• Drive type: RWD
• Interior color: Red
• Vehicle Title: Clear
Want to buy? Contact seller!