1967 Ford Mustang Shelby GT 350 Replica

1967 Ford Mustang

You are looking at one of the most accurate and detailed 1967 Shelby GT350 Replicas around. A great deal of time, hought, nd effort has gone into building this car with no expense spared. Many original Shelby parts and components were used during the build process and the result is one of the most stunning GT350 replicas you will find anywhere.

THE CAR

The foundation for this build was an all original 1967 Mustang C code fastback. Built at the San Jose, alifornia Ford plant on February 2, 967 and sold at J&B Ford Sales in Corte Madera, alifornia. The car spent most of its life in California until 1986 when it went to New Mexico. In 2000, t returned to California and 2 years later began what would become a 3-year restoration and conversion to its current state.

ENGINE

The original date coded 289ci engine is still in place. It was removed and completely rebuilt with a 0.010 overbore, orged aluminum pistons, igh flow oil pump, ouble roller timing chain, rane roller cam with a slightly higher lift and longer duration, delbrock 4 Bbl intake and 635 cfm carburetor, tainless steel valves and hardened valve seats ensure reliable running on modern unleaded fuel. Correct Shelby valve covers and early GT350 air cleaner assembly installed. A newly rebuilt and correctly date coded alternator was installed as well as correctly rebuilt water and power steering pumps. In addition, correct K code 5-blade Hi-po fan was installed. In order to ensure cooler running, 160-degree thermostat was used and a 4 core custom-built brass and copper radiator was configured to look correct and provide 20 percent more cooling capacity. The original C4 transmission was rebuilt and reinstalled. All belts, oses, attery, nd wiring are correctly marked with the FoMoCo and Autolite logos. Engine and drive train currently have about 900 miles on them since rebuild.

DRIVE TRAIN AND SUSPENSION

All new front and rear springs were installed with a 1-inch drop in ride height. New ball joints, ie rod ends, niversal joints, way bars, hackles, olts, nd urethane bushings were installed. Rear axle retains its original 2.79 axle ratio with new bearings installed. All brake and fuel lines were replaced with new as well as a new 22-gallon fuel tank. Front brakes converted to power disc by Stainless Steel Brakes with new proportioning valve. Rear brakes completely rebuilt with new drums, inings, heel cylinders and hardware. In addition to front-end rebuild, he entire power steering system was rebuilt as well including the pump, ssist cylinder, ushings, nd lines. Complete new Magnaflow 2 ¾” dual exhaust with crossover and chrome tips is attached to a set of Ford factory 4 Bbl exhaust manifolds. New shocks all around with the correct Koni logos from the mid 1960's. A new set of factory exact Kelsey Hayes Magstar wheels with the correct hard to find Kelsey Hayes chrome lug nuts and brand new BFG radial TA tires finishes off the look of an early build 1967 GT350.

BODY

Original rust-free body was completely stripped and all Shelby fiberglass panels and components were test fitted, anded and reworked and then test fitted again a total of 6 times to ensure outstanding fit and finish far exceeding anything that originally came from Shelby. The result is a body fit and finish equal to that of a brand new Lexus. This was an extremely labor intensive process but was well worth it to ensure beautiful fit and finish quality with no waves, ipples, r warping. The car was then primered and painted with 3 coats of original Brittany Blue before the white stripes were painted over the top of the car. In order to ensure a perfectly smooth transition between the blue paint and the stripes, coats of clear were applied with wet sanding between each. The result is a multiple award winning paint job that is like looking through a layer of glass. Correct Shelby taillights were added with new wiring, arnesses, nd solid-state rear sequential flasher relays. These were wired up to not only flash sequentially during turn signal operation but also to sequentially flash simultaneously when the brakes are applied. All body, eals, eather stripping, atches, asteners, nd plugs were replaced with new components. In addition, ll body bolts, uts, nd fasteners were replaced with correctly marked original type components. Over $20,000 went into the body and paint conversion alone and the result is a really outstanding work of art.

INTERIOR

All new carpeting, oor panels, eats, rim, tainless panels, ash, hrome, nd hardware were used. A custom 8,000 rpm tach was installed in the clock position from an aftermarket manufacturer in Australia. These are a rare aftermarket accessory and are no longer available. All electrical and wiring was refurbished and replaced where necessary. Original Shelby Stewart Warner under dash gauges were installed as was a very hard to find original Italian-made FIV Shelby GT350 steering wheel. Full Shelby roll bar includes impossible to find Shelby retractor shoulder belts. All of these Shelby components are usually missing on other Shelby replicas. A Ken Harrison AM/FM high power two-post deck was also installed with a trunk mounted CD player and iPod plug in. Sound comes from two 6 ½ inch Infiniti kick panel speakers and two 6x9 rear speakers. CD is controlled remotely from the aftermarket removable console. Rear seat is shown in the folded down position in the pictures but it is there and can be folded up again. Shelby GT350 floor mats, mblems, nd interior markings including seat belts finish off the interior. The final touch is the authentic Carroll Shelby signature on the right side of the dash. Signed by Carroll Shelby himself in 2007 and comes with a COA authenticating this signature. At the time of Carroll Shelby’s unfortunate passing I was offered $4,000 for this piece of trim with his signature and debated whether to include this with the sale of this car but decided to keep it together as a package.

The final result as you can see is one of the most stunning and correct GT350 replicas you will find. Click on the link below to see over 50 pictures of the car in order to appreciate the amount of time, ffort and expense that went into this build. Also comes with a few extra NOS parts, riginal radio, omplete Marti report and custom fitted car cover. Please email me with any questions you might have. I have had a few people ask me about where they can find financing. JJ Best is a great source for classic car financing and you can apply online at their website as well.

http://s173.photobucket.com/user/1967shelbygt350/slideshow/

• Condition: Used
• Make: Ford
• Model: Mustang
• Trim: Shelby GT 350
• Year: 1967
• Mileage: 986
• VIN: 7R02C178934
• Color: Blue
• Engine size: 289 V8
• Transmission: Automatic
• Drive type: Rear
• Interior color: Blue
• Vehicle Title: Clear
Want to buy? Contact seller!