Bronco PROFESSIONAL Rotisserie "FRAME OFF RESTORATION" PWR Disk Brakes, P/S Lift

1966 Ford Bronco

NO RESERVE !!!! This Bronco was a Professionally CompletedFrame offRotisserieRestoration and would cost $50,000+ today. It is in great condition. This is a great platform to build your dream Bronco and we can do that for you. It is uncut, we can build this to look like any Bronco you have seen. It currently has a 3 spd, but can be changed to any configuration. The body is straight and the color can be changed easily, as can the wheels, tires bumpers, etc.
This is a great Bronco that is absolutely perfect for running around town or back and forth to work. Its like a NEW TRUCK. WE are a Bronco shop and this was my personal Bronco. WE can configure this any way you would like or sell it to you as is.
Details:During the restoration all body panels were replaced or repaired. The body was removed from the frame and rebuilt on a jig. The body was then put onto a rotisserie media blasted and then primed with Epoxy primer. The body was then seam sealed with 3M two part seam sealer. The paint was sprayed on the under side with PPG Poppy orange single stage paint. all the jambs were done at this time as well. Mean while the frame was stripped apart and sandblasted the axles were stripped apart and sandblasted as well. The axles were reassembled with new bearings and seals. The front axle receiveda disk brake upgrade. Both the frame and axles were painted with Chassis Black. The suspension is a 3.5" lift kit with all new bushings, new springs, and new shocks. The Motor was rebuilt along with the transmission and Tcase, reassembled and reinstalled onto the chassis. The tub then was reassembled onto its frame. Everything was aligned and final paint was done with PPG 2 base coat clear coat to match the underside. A Rhino lining was done on the interior prior to final assembly. Final assembly included new wiring, a new rollcage, recovered seats, custom electric windshield wipers, power brakes and the thousand little items to finish the Bronco. This is a restoration that was done correctly.
It has a 289 V8 that was rebuilt during the restoration. Power steering was added to make it a friendly driver. It has a Three Speed Manual Transmission and Dana 20 Transfer case that were rebuilt.
It has roadster doors with soft doors and a soft top. It has a rhino lined interior with black bucket seats. It has a full family style roll cage with shoulder belt seat belts. It has custom bumpers the front is set up for a winch. The rear bumper is where the spare tire mounts so it isn't riding on the body. The Bronco has a 3.5" lift kit and 31" tires. It is uncut in the rear and has a full size spare.
Call Dusty at 435.640.6614 and Leave a message, we are building Broncos and are backed up two plus years on Full Rotisserie builds. This is a great way to get a Frame off Build without waiting!!

• Make: Ford
• Model: Bronco
• Type: SUV
• Year: 1966
• Mileage: 47,512
• VIN: U14FL821425
• Color: Orange
• Engine size: 289 v8
• Number of cylinders: 8
• Fuel: Gasoline
• Transmission: Manual
• Drive type: 4WD
• Interior color: Black
• Drive side: Left-hand drive
• Options: 4-Wheel Drive, Convertible
• Vehicle Title: Clear
Want to buy? Contact seller!