1929 FORD MODEL A SEDAN HOT ROD HOTROD RAT ROD RATROD 1928 STREET PROJECT

1929 Ford Model A

NO RESERVE!!YOU ARE BIDDING ON A 1929 FORD MODEL A SEDAN ROLLING PROJECT
I DO HAVE A BRAND NEW VISOR AND PANELS ABOVE THE DOORS THAT WERE ORDERED THAT ARE IN THE MAIL ON THEIR WAY HERE THAT WILL BE INCLUDED WITH THIS SALE
THIS IS A PROJECT HOT ROD ROLLING CHASSIS.. WHAT YOU SEE IS EVERYTHING YOU GET PLUS THE UPPER PANELS ABOVE THE DOORS AND A 1930 FORD VISOR. MINUS THE MOCK UP BLOCK, WHAT IS IN IT IS A PLASTIC MOCK UP BLOCK THAT IS ONLY USED TO SET ALL THE ENGINE AND TRANSMISSION MOUNTS
PLEASE READ FULLY AND BE PREPARED TO COMPLY WITH ALL TERMS OF THIS SALE UPON AUCTION END ANY QUESTIONS NOT ANSWERED HERE PLEASE CONTACT ME AT 812-216-3754INCLUDED IN THIS SALE IS1929 FORD MODEL A SEDAN PROFESSIONAL CHOP DONE ON IT OF 8 INCHES, ALL THE DOORS LINE BACK UP PERFECT AND ALL THE BODY LINES WERE SECTIONED IN TO MATCH UP AS WELLITSCHANNELED 3 INCHES. BODY WILL NEED SOME PATCH PANELS IF YOU WANT TO MAKE IT PERFECT BUT ITS ALL FLAT STEEL SO YOU DONT HAVE TO BUY ANYTHING YOU CAN SIMPLY MAKE THEM IF YOU WANT IT TO BE A NICE FINISHED OUT SEDAN HOWEVER AS YOU CAN SEE THIS IS A NICE MODEL A BODY AS IT IS. DOORS SHUT NICE TO THE BODY.ALL THE SUB FLOORS ARE IN THIS HOT ROD AND I HAVE THE 16 GAUGE SHEET METAL THAT IS READY TO BE INSTALLED TO THE SUB FLOOR. ALL BODY MOUNTS ARE DONE AND BODY IS MOUNTED TO FRAME.ENGINE MOUNTS ARE ON AND TRANS CROSSMEMBER MOUNTS ARE ALL ON. SALE COMES WITH ALL THE RUBBER MOUNTS SO ALL YOU HAVE TO DO IS BOLT THEM TO YOUR ENGINE AND TRANS AND DROP IT IN. ENGINE AND TRANS MOUNTS ARE ALL BRAND NEWFRONT SUSPENSION IS A BRAND NEW HOT ROD SPRING ON FRONT MOUNTED TO THE REALLY NICE DRILLED SPLIT WISH BONES AND THE FRONT AXLE IS A DRILLED 4 INCH DROP AXLE WITH A BRAND NEW DISC BRAKE KIT INSTALLED TO THE FRONTREAR SUSPENSION IS A CUSTOM 3 LINK WITH A PAN HARD BAR WHICH IS VERY BEEFY. ALL BRAND NEW BUSHINGS, AND ITS RIDING ON A PAIR OF COIL SPRINGS WHICH ARE MOUNTED TO A CHEVY 10 BOLT REAR END WITH OVER SIZED DRUM BRAKES ON BACK,THIS HOT ROD FEATURES COWL STEERING WHICH IS A NICE TIGHT BOX THAT WILL STEER THIS HOT ROD NICELYWHEEL COMBO IS A PAIR OF 19 INCH SPOKES UP FRONT WITH BRAND NEW TIRES AND A PAIR OF 20 INCH WHEELS OUT BACK WITH BRAND NEW TIRES. CHOPPED 32 STEEL FORD GRILLE SHELL WITH A RODDER INSERT INSTALLED ON FRONT WITH A BRAND NEW RADIATOR WHICH IS READY FOR A V8 WITH A BUILT IN TRANS COOLER WHICH ALL COMES WITH THE SALE. ALSO A NICE ORIGINAL SET OF 34 FORD HEADLIGHTSALL AND ALL ITS SETUP RIGHT WITH REALLY NICE HOT ROD PARTS. ITS A DECENT BODY WITH A CLEAN CHOP AND THE REAR END WAS SETUP RIGHT WITH A 2 DEGREE PINION ANGLE DOWN JUST LIKE A FACTORY CAR AND THE FRONT END WAS SETUP WITH A 7 DEGREE RAKE BACK JUST AS A HOT ROD SHOULD BE. THIS CAR IS READY TO BE BROKEN DOWN AND EVERYTHING FINALIZED AND PAINTED AND THEN A REAL ENGINE PLUMBED AND WIRED INTO IT AND SOME WINDOW GLASS INSTALLED.. THIS CAR IS SETUP AT A 107" WHEEL BASE.. ALL THE HARD WORK IS DONE AND ITS BEEN PROFESSIONALLY SETUP AS A ROLLER AND IS BASICALLY A BLANK SLATE READY FOR YOU TO MAKE IT YOUR OWN HOWEVER YOU WISH TO MAKE IT LOOK. A 1950 CHEVY 3100 DASH WAS SECTIONED DOWN AND MOLDED INTO THE CAR AS WELL AND A QUICK RELEASE STEERING COLUMN IS INSTALLED
THIS IS A NO RESERVE AUCTION PLEASE BE PREPARED TO FOLLOW PAYMENT INSTRUCTIONS WHICH IS A DEPOSIT WITHIN 24 HOURS AND FULL PAYMENT WITHIN 3 DAYS OF AUCTION END. THE CAR IS WELCOME TO REMAIN HERE UNTIL PICKUP CAN BE ARRANGED.
THERE IS NO TITLE TO THIS MODEL A
THIS CAR IS SOLD AS IS WHERE IS WITH NO WARRANTY IMPLIED OR EXPRESSED, I CAN HELP WITH SHIPPING IF THIS IS YOUR FIRST TIME NO PROBLEM I HAVE A NICE INCLOSED CARRIER THAT HAS SHIPPED A LOT OF HOT RODS FOR ME. I RESERVE THE RIGHT TO END THIS AUCTION AT ANYTIME AND BUYER IS RESPONSIBLE FOR ALL SHIPPING ANY OTHER QUESTIONS PLEASE CONTACT ME AT 812-216-3754

• Condition: Used
• Make: Ford
• Model: Model A
• Trim: HOT ROD
• Year: 1929
• Mileage: 999,998
• Vehicle Title: Rebuilt, Rebuildable & Reconstructed
Want to buy? Contact seller!