1973 Dodge D100 - Used VGC, rare & Ram tough!
1973 Dodge Other Pickups Adventurer SE
1973 DODGE D100 ADVENTURER SE
VIN: D14AE3X044128
Description:
OK Mopar Enthusiasts, listing my original appearing 1973 Dodge D100 conventional cab, long bed pickup truck with 131” wheelbase and rare Adventurer SE package that was dealer ordered on 10/25/1972 from Howard Taylor Dodge in San Diego, CA with a 318, 2-bbl V8, built in November 1972 and delivered on 12/12/1972 for a total purchase price of $4,338.55 per sales order and delivery documentation on file.
The truck is now powered by a professionally rebuilt (in August 2007 by Ed Hale High Performance Engines - Lakeside, CA) HP 340-4bbl small block motor (Engine Casting #
| 2780930 | 340 | LA | 1968-73 | Not T/A or AAR |
(Build Date: 10/1971)
The replacement 1971 vintage LA series motor has 10.3:1 compression ratio (93 octane fuel is best for such compression. Be sure the total timing is below 40*BTDC. Most run a 36*, that's a good goal to tune for), rebuilt Holley #4160 - 600 cfm 4-bbl carb with functional electric choke, Edelbrock aluminum Performer dual plane intake, forged crank and larger factory “X” heads with vintage aluminum valve covers, Isky Racing 256 Supercam (#390125/26 with 256 duration, 425 lift & hydraulic lifters), Hedman (CA) Elite #79088 HTC street headers (size 1-5/8”) connected to Flowmaster mufflers & full 2-1/4” dual exhaust system with rear side exit turn down chrome 3” pipe ends for a nice Mopar “rumble” sound. Aluminum replacement radiator from Griffin with electric fan(s) and dash mounted switches w/ 16” - 2,700 cfm S-Blade cooling fan to keep things cool under the hood. A rebuilt (05/27/2005 by AmTrans - San Diego, CA) A727 HD 3-speed auto TorqueFlite/LoadFlite for trucks, transmission with aftermarket (PML as-cast finish) deep aluminum finned pan to help propel this classic Dodge truck.
Carburetor Info:
* Holley #6160-1
* Series ............. 4160 {Vacuum Secondary}
* Application ..... 1968-71 Mopar 340 {275 HP Base Engine spec w/Dual Exhaust}
* Throttles ......... 1.563" Primary x 1.563" Secondary
* Venturi's......... 1.063" {Primary} x Automatic Vacuum {Secondary}
* CFM Rating...... 600 {Advertised}
Note: Though 'advertised' at 600 CFM, this Holley Carburetor should put out closer to 635 CFM onthe 340 {@ W.O.T.}
Note: Was used on Automatic Transmission 'only' cars.
Reportedly, a decent Holley Carburetor for 340 "General Street Performance” engines.
Rear Axle Info:
Spicer (Dana) 44 axles use an 8-1/2-inch ring gear bolted to the carrier by “10 bolts” that are 3/8 x 24 right-hand thread. The case itself is 9-3/8 inches in diameter. The cement mixer-shaped differential cover also has 10 bolts. The input on the pinion shaft is 1-3/8” in diameter and has 26 spline. Original ring and pinion gears were produced from 8620 steel, making this assembly capable of handling most engine horsepower and torque specifications. Although not as strong as its big brother, the Dana 60, it is quite a lot lighter than the 60 without sacrificing much in the way of strength. Axle shafts are 1-1/8 inches in diameter with 30 spline 1-5/16-inch ends. Dana 44 rear ends have two carrier sizes or breaks; any gear size from 2.72:1 to 3.73:1 will use one carrier, gears from 3.92:1 up to 5.89:1 use another. Standard case Dana rear with 3.23 gear ratio and limited slip differential is assumed equipped on this vintage D100 truck.
This is a two (2) owner truck (CA open / clear Vehicle Title in hand) with the last owner who purchased the vehicle used on 06/29/1984 for $2,200 and then owned for over 36 years and rebuilt / repainted this now antique truck.
There are approximately 118k miles on the truck since purchased / delivered new in December 1972 with less than 5k miles on the professionally rebuilt / upgraded motor and trans. This classic Mopar truck runs out fine on Premium pump gas distributed from the single 25 gallon fuel tank located directly behind the front seat inside the truck cab. Binder of receipts available for all work done to the truck by the 2 prior owners over the years, including the exterior body and re-paint work completed in July 2004 or 16+ years ago using White PPG#91051 & Tan PPG#28409. The truck inside bed & tailgate areas are still original patina showing minor wear & tear. Truck body panels are mostly rust-free, however, some minor paint bubbling is noticeable on the exterior top of the right front fender near the antenna base and inside the engine bay, lower RH & LH door panels. The frame and undercarriage area was left untouched and has visible surface rust, but no rust through holes. Truck has power steering, power brakes (front disc & rear oversized drum), A/C (converted to R134, but reportedly leaks down), very rare optional and still clean / fully functional locking tool storage box on RH lower exterior of truck bed and speed/cruise control option (all in place, but currently disconnected). Interior has a nicely re-upholstered front bench seat, equipped with aftermarket gauges for oil pressure, water temp and vintage Suntuner 8,000 RPM tach, along with non-original Pioneer stereo system and two floor mounted box speakers. Approx. six year old 16” Bridgestone Dueler A/T Radial tires (P245-70R16) with approx. 5k+ miles mounted on 5-lug, reconditioned in 2004 silver & clear powder coated 16” Eagle alloy 8-spoke wheels and HD Rubber Truck Mud Flaps all around. Original spare Polyglas G78-15 tire is still with the truck. Truck was ordered new on 10/25/1972 and delivered on 12/12/1972 from Howard Taylor Dodge in San Diego, CA by local area resident, E. D. Kohl, and original dealer order / vehicle delivery documentation confirms same. The original blue CA license plates (88 249N) remain on the truck since new and come with the truck to continue its legacy.A truck cover will come with the vehicle, along with some spare parts. Documented details on file for the replacement / rebuilt Chrysler “LA” Series hi-performance 340 c.i. - 4bbl. small block engine / A727 HD TorqueFlite automatic 3-speed transmission rebuilds and partial truck restoration (set of 4”x5” color photos in plastic sleeves showing body shop work performed including stripping, sanding down body panels to bare metal, prep & repaint truck exterior, underside of hood and door jambs to factory appearing original White & Tan two tone colors with replacement wood grain decal trim inserts). Chrome trim all intact and in VGC. Truck has operational tailgate with the bed area in great condition left in original looking patina. Undercarriage area is not restored.
1971 Factory 340 specs:
Engines painted Orange / Blue late model year
275 Gross HP @5,500 RPM/ 235 Net HP @4,400 RPM & 340 lb.-ft. Torque @3,200 RPM
10.3:1 Compression Ratio
Hydraulic cam with 286 degree Cam Intake, 276 Cam Exhaust & 44 Overlap
“J” Heads came for the 1971 cars - 2.02 intake / 1.88 exhaust
Thermoquad AVS 4-bbl carb. (1971-73)
Engine Casting #2780930-340-6
Build Date: 10/71 (October 1971)
VIN DECODED:
| Serial Number | D14AE3X044128 |
| Make | Dodge |
| Model | D1 - D100 |
| Body Style | 4 - Conventional Cab with Sweptline box; Compact Hi-Line Wagon (Royal Sportsman) |
| Gross Vehicle Weight | A - 6,000 lbs or less |
| Engine | E - LA 318-2bbl. V8 2V |
| Year | 1973 |
| Plant | X - Missouri Truck |
| Wheelbase | 115,131,133,149 |
| Rating | 1/2 Ton |
| Build Number | 44128 |
DIMENSIONS:
Conventional Cab w/ Adventurer SE package.
Length - 213.6”
Width - 79.5”
Height - 78”
Wheel Base - 131”
Weight - 3,900# (approx. empty weight) - GVWR: 5,500#
Tires - G78-15-B (Original Polyglas / Bias Ply still with Truck)
Good luck bidding on this rare, above average condition, well maintained, classic Mopar truck that you can be proud to own, drive and show. Please ask questions/request additional photos/info before auction ends. Due to these unprecedented times, personal visits to inspect the vehicle must be completed with mask and gloves, along with social distancing for all of our safety.
Vehicle will not leave my possession and title will not be provided until all funds have cleared my bank.And Buyer is responsible for all shipping charges and taxes, if applicable.
- Make: Dodge
- Model: Other Pickups
- Type: Conventional Cab - Long Bed
- Trim: Adventurer SE
- Year: 1973
- Mileage: 119000
- Color: Tan & White
- Engine size: 340
- Number of cylinders: 8
- Power options: Air Conditioning
- Fuel: Gasoline
- Transmission: Automatic
- Drive type: RWD
- Interior color: Tan
- Drive side: Left-hand drive
- Vehicle Title: Clean Want to buy? Contact seller!
