46 chevy panel truck for sale

1946 Chevrolet Other Pickups

1946 Chevy Truck – restoration in progress – value to date:$45,000

There isn't much left to do to complete.The truck is almost operational with tons of new parts. Hate to see it go …but there is no room or skill to complete it.To date, it has been worked on only by experienced professional custom auto shops. Progress stopped - and the truck has been in storage.

New Parts:

• Chevy 350 HO small block -- turns over and mounted to the frame.
• Ford Mustang Rack and Pinonpower steering
  
• Ford nine inch gear
• Wilwoodpower disc brakes
  
• Emergency brake release and automatic floor shifter set up.
• Brake lines
• Holley 4-Barrel Carburetor – needsaccelerator pedal to be hooked up to carburetor
• Edelbrock”sSBCVortecManifold and exhaust
• 650 Thunder Electric Choke
• March Performance "Revolver" Serpentine Sys. and air cleaner to dress out the engine.
• Mini hi-torque starter
• Electrical fuel pump
• A/C Line Chrome (no A/C installed).
• Action Machine 1330 drive shaft -- needs to be installed
• Ford 9-inch rear gearing
• Heidt’s Independent Front and Rear coil over shocks suspension
• Heidt’s rack andpiñonpower steering
• Wilwooddisc brakes
• Mustang power steering and brakes
• Master cylinder and brake booster
• Radiator (PRCwith Shroud #21010) with …
• SPAL16” fan
• Alternator generator
• Floor frame and newsheet metal bed(see pic) replaced original woodenfloor.
• Working motor for power windows.
• Instrument cluster -- new and period correct.
• Aluminum 15 gallon tank (needs hookup)
• Fuel line and pump. (Gooseneck is to outside)
• Distributor, spark plugs

Rebuilt:

• 700r4Transmission with internal cooler -- needs speedometer cable to be hooked.

Body:

• That famous Art Deco front grill is original, re-chromed and in excellent shape.
• Original dash and instrument panelframe is in great shape. Media blasted, boxed, primed and painted.
• Motor splash guards, starter, hood, running boards, fenders, headlight buckets, bow-tie front valenceare in great shape.
• Rear floor frame and metal bed are new and in great shape.
• Dashboard trim is chromed, door’s interior panels are in great condition.
• Overall body sheet metal is straight -- some smoothing required; no dents.
• Interior wheel well – good condition with a few dings of no concern
• Interior walls, floor and wooden batten that runs along the sides are in great shape
• 2 bucket seats are media blasted and painted - metal in good condition.
• 2 steering columns and wheel -- original and anIdidit. (The original is in great shape)
• Interior rear door panels are in good shape - cosmetic dent and dings on inside.
• Front and rear valences in good shape
• The rear driver’s side running board has a 1/2 to 3/4 gap to the rear fender. The previous owner tried to narrow the gap with thickbondoon rear fender. The rear fender is not dented.
• There are no rust holes in the interior or along the rockers.

Tires:

• Front tires hold air and are on replaceable rims.
• Back tires need to be replaced.

Doors/Windows:

• Front and rear doors open and close well, new hiddenhinges were installed.
• Have glass and frames for all windows.
• Two window cranks – front window cranks outward
• Windshield frame -- good condition. (There are no windshield wipers.)
• Door windows are wired for power; window motor is mounted.Need power window switches

Previous Repairs:

• Two interior rear roof corners patched -- looks great outside on the roof.
• Right rear door -- fiberglass/bondoskimming to smooth out the door seam. Looks good from outside.
• Hole on the driver’s side where a previous owner drilled a bolt through the wall of the panel to mount an extra tire. No rust holes or dents.
• Drip rails
• Rear door hinges
• Smoothed out withbondoright fender since it did not meet up to running boards.Good condition - no dents.

Needs:

• Body primed and painted
• Primer for front floor boards
• Installation of engine hood and panels - I have those
• Battery hookup and ignition switch -- battery for ignition, lights, dash instrument panel
• Rear bumper valence to be mounted to the quarter panels.
• Bumpers and running boards to be reattached.
• Locks and latches for doors (have original handles)
• Chair rails bolted/welded to the floor and cushions/covers for bucket seats.
• A/C install
• Installation of interior door panels -- panels are in good condition.
• Installation of rubber for existing window frames glass
• Lock, latch and windows installed for rear doors.(I have the handle and windows).
• Power window switches for door windows
• Emergency brake hook-up to release handle
• Installation ofa throttle kick down and pedal
• Installation of head, brake, turn, and interior lights – need lights/wiring; have headlight buckets and gaskets
• Possibly light body work for rear quarter panels by valence
• Rail runners for car seats

Truck sold as is - deposit required within 24 hours of successful bid - complete payment within 7 days. Buyer is responsible forpickup/transportation after money clears bank. We will hold truck for 15 days before storage charges begin.

• Make: Chevrolet
• Model: Other Pickups
• Type: Van Camper
• Year: 1946
• Mileage: 0
• Number of cylinders: 8
• Transmission: Automatic
• Drive type: RWD
• Vehicle Title: Clean
Want to buy? Contact seller!