74 Chevrolet Corvette

1974 Chevrolet Corvette Coupe

Numbers matching with 67652 original miles. Many upgrades A/C compressor, accumulator with cycle switch, and hoses replaced and filled with 134a Freon duct temperature 40 degrees. The A/C duct work and box all resealed, heater core replaced. Camshaft and lifters replaced comp cam# 11-242-3 RPM Range 1600-5800 dynoe'd 375 hp 470 torque,Edelbrock performer intake, Edelbrock performer high compression oval port heads giving the engine a 9.20 compression ratio,Edelbrock high flow water pump giving engine temperature 195 on 100 degree days with A/C on 200 degrees, Edelbrock timing chain double roller, comp cams ultra pro magnum roller rocker arms, MSD 6al digital box with distributor, blaster 2 coil, Msd 8.5 wires, carburetor rebuilt epoxy put on well plugs carburetor was tuned on a dyno along with timing for ultimate performance. Flywheel, clutch, pressure plate, replaced. TKO 600 5 speed installed less than 1000 miles ago. All fluids have been replaced with synthetic oil. Owner before me replace brakes, bushings, cv shafts, hoses, shocks, exhaust, pretty much all the parts under the car. I do have the original M21 close ratio transmission. Over 30,000 invested. Car will be released when bank says funds are secure. No refund on deposite.

On Aug-04-19 at 15:07:01 PDT, seller added the following information:

Car has p/s with tilt/telescoping steering wheel. I also have the factory hood and a carburetor ULTRA DP 850 electric choke gray. Jeg's part number #510-0-76850HB THAT GOES WITH CAR.

On Aug-04-19 at 16:04:12 PDT, seller added the following information:

I also have stock valve covers, dual snorkel air clearer, and chrome distributor cover.

On Aug-04-19 at 17:13:56 PDT, seller added the following information:

Car has been garaged keep.

On Aug-04-19 at 19:35:01 PDT, seller added the following information:

Car could use some very minor body work "paint chips from door's " paint was put on in 1991.

On Aug-05-19 at 07:36:46 PDT, seller added the following information:

Custom Exhaust Headers "HAND MADE" from Corvette Central #323035 are also on the car ceramiccoated and copper coated on the inside keeps the heat inside the 2 inch tube keeping the driver cool.Also radiator support has been replaced with one from Eckler's Corvette #125105.

On Aug-05-19 at 09:08:10 PDT, seller added the following information:

I also have original driveshaft.

• Condition: Used
• Make: Chevrolet
• Model: Corvette
• SubModel: Coupe
• Type: Coupe
• Trim: Coupe
• Year: 1974
• Mileage: 67542
• Color: White
• Engine size: 454
• Number of cylinders: 8
• Power options: Air Conditioning, Power Windows
• Fuel: Gasoline
• Transmission: Manual
• Drive type: RWD
• Interior color: Tan
• Drive side: Left-hand drive
• Vehicle Title: Clear
Want to buy? Contact seller!