1973 K/10 4X4 CHEVROLET PICKUP LB 115K! 1969 350/250 ENG 205 TRANSFER CASE TH350

1973 Chevrolet C-10 K/10

CLEAR TITLE. Grampa's farm truck. Runs and drives. Rare, CLEAN and hard to find. 115K ORIGINAL MILES! See photo of pedals...very little wear. Hawaiian Blue/White Top. Slate Blue Interior. ALL ORIGINAL, even paint!!!...except engine which was swapped out with 1969 350/250HP and wagon wheels.
1973 K/10 4X4 Chevrolet Pickup. Long Bed. 205 Part-Time Transfer case. Dana 44 Front Axle. 1969 350/250HP Engine that was rebuilt and swapped at some point. 1973 Original 4BBL Intake with Rochester QuadraJet. TH350 Auto Transmission. Power Steering, Air Conditioning, Power Disc Brakes, Towing Wiring, Heavy Duty Shocks, Fuel Tank Skid Plate, Dash Gauges Package, Slate Blue Interior, Sliding Rear Glass. Tires have good tread and are Patriot 31X10.50-15LT.
This was a local gentleman's farm truck. He took very good care of it, but it was not garaged. It does not have one single dent, but does have rust on body. Underside is VERY clean, only surface rust. Floors are solid as can be. Typical GM rocker repair was performed years ago. Frame is solid as well. Steering box area solid, all other suspension mounts solid. Interior is nice for age. One spot of vinyl missing on back rest of driver side and dash is cracked. Most lighting working, one turn signal bulb needs replacing. Blower fan blows slow. Engine temperature sending unit not working, gauge is good. Horn not working. A/C is all there but unhooked. Wipers work well. Some rust in bed, tail gate works great. I have the fuel skid plate out so it can be restored/painted. Radio is Original and works great!
New Battery, Plugs, Wires, Gas Tank, Fuel Sending Unit.
TONS OF PHOTOS HERE:http://s200.photobucket.com/user/velocejoe/library/CHEVROLET%20K-10%201973?sort=3&page=1
DRIVING VIDEO HERE:https://youtu.be/KAf5FVivGO8
Truck runs and drives great. Cranks right up, idles great, no funny noises from engine or trans. Will need tires balanced. Passenger side valve cover gasket leaked at one point, but has slowed alot just with a little tightening, the bolts were a little loose. Will need front brake pads, but brakes work well. Fuel Filler Hose and Vent Filler Tube Hose needs replacing(easy fix), it leaks when filling up. 4X4 works well. Hubs work properly, truck shifts into 4Hi and 4Low and engages properly.
The engine has great even compression except for cylinder #7. Compression numbers are COLD: (1) 150, (2) 145, (3) 145, (4) 145, (5) 150, (6) 140, (7) 85, (8) 140. Cylinder #7 has a burnt valve. I squirted oil into cylinder and compression did not rise...thus...burnt valve. Engine has a stamp from where it was rebuilt at some point. I have a receipt from a long time ago stating that he had it done. Still runs and idles great.
This would be a great truck to have some fun with. You can drive it like it is without rectifying burnt valve of course, if you want. It will need a little minor TLC to be roadworthy for long trips..mostly front brake pads and tires balanced. Glove Box cubby is missing. Other than that she is all here and complete. These are getting hard to find in ANY condition, especially one with low miles that runs and drives.
OK, here are the details, engine/axle/transfer case codes, etc...
CKY143F350463. C= Chevrolet, K= 4WD, Y= 350 High Torque Engine 155HP 255 Torque, 1= 1/2Ton, 4= Cab and Box, 3= 1973, F= Flint, 350463= Sequence
Original engine replaced with rebuilt 1969 350/250 and TH350 Auto Trans.
Engine Suffix Numbers are TO227HD. T= Tonawanda, 0227= Feb 27th, HD= 1969 350/250 TH350, Came in A,F,X bodies.
3932388 Engine Casting Code = 1969 350 2 or 4 bolt. I do not know which it is, I imagine since farmer replaced the original engine, he went with a 4 bolt, but I have no way to tell.
3932441 Heads Casting Codes = 327ci/350ci, 1969-1970, 1.94 Intake/ 1.50 Exhaust, 76.26cc Chambers
B18 9 Heads Date Codes = Feb 18th 1969.
3997771 Intake Casting Code = 1973 350 4BBL Quadra-Jet.
19B359099 Rebuilt Engine Stamp Code. Installed at time of rebuild by independent shop next to engine suffix codes.
C-99404 Transfer Case Casting code = New Process 205. Ratio...1.96:1 Lo/ 1.00:1 High. 6-2-72 Date Code.
3896839 Rear End Casting Code = GM. Having trouble finding more info using casting code. 12 Bolt.
TAH W343 1 Rear End Axle Code = TA 3.07 Ratio I'm pretty sure, catalog and other sources list 3.07 as coming with V8 engine, H= ???, W= Warren, 343= Dec. 9th 1= 1st Shift. if anyone can decode this fully, please let me know. I could only find codes up to 1972.
44-5 CF Casting Code Dana 44 Front.
43-14, 3.07 Axle Tag Dana 44 Front. 43-14= Gears??, 3.07 = Ratio.
12 1 2A4 Axle Date Code Dana 44 Front. 121= May 1st, 2= 1972, A= Plant, 4= Shift
605374-9 BOM Bill Of Material Code. Dana 44 Front. Std. 3.07, 1973 K/10.
I cannot find the transmission numbers.
Feel free to ask questions. 100% positive feedback Ebayer for over 17 years.
BUYER IS RESPONSIBLE FOR ALL SHIPPING ARRANGEMENTS.
OK, here is all the stuff I have to state for the brilliance of the world:
IF YOU HAVE LESS THAN 100 FEEDBACK, YOU MUST CONTACT ME BEFORE BIDDING, IF NOT, YOUR BID WILL BE CANCELED, NO EXCEPTIONS!!!!
PAYMENT IS DUE WITHIN 7 DAYS OF AUCTION END. CAR MUST BE PICKED UP WITHIN 14 DAYS OF AUCTION END. A STORAGE FEE OF $25/ PER DAY WILL BE APPLIED THEREAFTER.
Thanks and good luck.

• Condition: Used
• Make: Chevrolet
• Model: C-10
• Trim: K/10
• Year: 1973
• Mileage: 115,156
• VIN: CKY143F350463
• Color: Hawaiian Blue
• Engine size: 350/250 V8
• Number of cylinders: 8
• Power options: Air Conditioning
• Fuel: Gasoline
• Transmission: Automatic
• Drive type: 4WD
• Interior color: Slate Blue
• Options: 4-Wheel Drive
• Vehicle Title: Clear
Want to buy? Contact seller!