1968 CHEVROLET C50, C10, C20... C50 5 TON FARM TRUCK, ORIGINAL NUMBERS MATCHING

1968 Chevrolet C50 C10 C20 C30 TRUCK OTHER

MATCHING NUMBERS 1968 CHEVROLET C-50 (5 TON)NUMBERS MATCH GLOVE BOX DOOR FACTORY INFORMATION DECAL327 V8 (4 Bolt Mains) WITH FACTORY 2 BARREL CARB AND ORIGINAL OIL BATH AIR CLEANER, 4 SPEED (granny box) TRANS WITH PTO(power take off)and 2 SPEED REAR AXLENEW 22.5 X 6.75 WHEELS with EXCELLENTTIRES, 900 ON FRONT, 10's ON BACK.... Ya won't have ta buy tires for years!!!
This is one of my personal project vehicles. Been workin' on it for quite some time and turnin' out nice. Every time I drive it somewhere, someone wants ta check it out.... and then stand around and talk old trucks. My 30 minute trips ta the Post Office, Store, or where ever usually turn out ta be a hour+ trip. I guess that's half the fun of having it, huh?.
THE GOOD STUF- FIRST OF ALL... YES, CURRENTLY TAGGED, CALIFORNIA TITLE, FREE AND CLEAR IN HAND IN MY NAME- 2 COMPLETE SETS OF KEYS- STARTS AND RUNS GREAT FOR A 50 YEAR OLD TRUCK- REAR CAB CORNERS, FLOORS, BOTTOMS OF DOORS, ROOF GUTTER, AROUND WINDSHIELD, AND DOOR SILLS ARE SOLID,NO RUST-OUT / ROT, ALL SOLID STEEL (SURPRISEHUH? Not In California folks!)- NEW WHEELS (22.5 x 6.75 tubeless) ALL AROUND (NOS "ACCURIDE" UP FRONT, NEW WN28160J'S IN BACK, SUPPLIED BY "WHEELS NOW"... Accuride no longer makes this wheel, they recommended "Wheels Now", who purchased the rights to Accurides specs and manufacturing rights... ALL WITH DOT NUMBERS AND CERTS.)- ALL LIGHTS WORK AS THEY SHOULD, Hi / Lo beam, Tail / Stop and Turn and Clearance lights- NEW "BACK-UP" LIGHTS MOUNTED ON TOP OF "STACK RACK", AND WORK WHEN IN REVERSE AS THEY SHOULD.- WINDSHIELD WIPERS WORK.- ALL GLASS THERE WITH NO CRACKS NOTICED. (There are a few very light "windshield wiper marks" where some-one ran wipers with minimum rubber on them... AND... some very slight "fogging" on furthest left and right sides of windshield.... can't see well in pictures, so I have ta tell ya that they are there)- DOOR HANDLES, WINDOWS and WING VENT WINDOWS WORK AS THEY SHOULD...(fairly easily actually.... NEW, NOT INSTALLED YET, window FELT KITS FOR BOTH DOORS INCLUDED with sale)- HOOD AND DOORS ALIGN NICELY WITH BODY AND FENDERS, NICE EVEN GAPS ALL AROUND- NEW DELUXE DOOR ARM RESTS- NEW GLOVE BOX, "BOX" WITH NEW LOCKING (Keyed with doors) PUSH BUTTON OPENER LATCH- NEW DOOR LOCKS WITH KEYS, (Door locks and glove box keyed alike)- NEW STAINLESS STEEL CAB DOOR SILLS- NEW HEAVY DUTY ALUMINUM SIDE BOXES, FRAME MOUNTED, double latched with locks and keys.- FRAME REAR HALF HAS BEEN RE-WORKED WITH ALL NEW LIGHTS, NEW 15,000# TOW HITCH, MUD FLAPS AND FRONT OF REAR TIRE 1/4 FENDERS.... LOOKS BEAUTIFUL! with a large open area between rear axle and rear of frame for a 25 to 30 gallon gas cell to be mounted (AND PROTECTED)! (My "plan" was to remove the gas tank from behind the seat... leave the tank filler AND CAP as stock... just no tank inside, for more leg room and no "gas smell" inside cab... YES, original gas tank is STILL INSIDE and OPERATIONAL)See pictures- BEAUTIFUL NEW TWIN EXHAUST STACKS, WITH NEW EXHAUST FROM ORIGINAL CAST IRON CHEVY HEADERS TO STACKS... NO MUFFLERS AND SOUNDS GREAT!(I drive this truck around all the time, and never been stopped for exhaust noise... never been stopped for anything for that matter..... and remember... this is California...)- WHEEL LUG NUTS HAVE STAINLESS STEEL CAP/COVERS ALL AROUND (a bag of "extras" IS INCLUDED with sale)- ALL OF REAR FRAME and FRONT BUMPER, WERE CLEANED, WIRE WHEELED AND SANDED AND OXIDE PRIMED. OUTSIDE (VISIBLE) AREA IS "SATIN BLACK PAINT", INSIDE (NOT VISIBLE) IS "BED LINER BLACK" (Much more durable than paint... but I don't like the look on visible areas)- FRONT BUMPER HAS BEEN RE-WORKED TO MAKE IT MORE MATCH THE REAR END OF TRUCK WITH PLATE PROTECTION AND GUSSETING... PLUS IT LOOKS GREAT!(YES, this is a LATE 50's / EARLY 60's front bumper, NOT original. It is a subtle change and I personally did NOT LIKE the look with the deeper, flat look of the 68 original front bumper. My opinion... the early 60's has more "style".... and, no... I do NOT still have the 68 bumper)- ORIGINAL RADIO STILL IN PLACE(Not working... but it IS there and LOOKS BEAUTIFUL and so cool!)- STILL HAS ORIGINAL FACTORY DECALS ON GLOVE-BOX DOOR, AND HEATER SHROUD AND I.D. PLATES ON DOOR JAM. (see pictures)- LIGHTER STILL HAS ORIGINAL PLASTIC "LIGHTER" RING AROUND IT- ORIGINAL GREEN SEAT BELTS STILL THERE, JUST NOT IN USE(kind of ugly and one latch ((right)) is broken but works if ya care ta use it... AND still there!!!)- ORIGINAL "OIL BATH" AIR FILTER STILL IN USE YES, with clean oil in it!- ENGINE OIL AND FILTER RECENTLYCHANGED (Shes' got 10-40 in her right now.... regular, NOT Synthetic, great for our climate... use what you use where you live)- DOORS AND HOOD OPEN AND CLOSE AS THEY SHOULD.... NO SAGGING, NO SLAMMINGOR HARD PULLING TO OPEN OR CLOSE... NICE!- ALL THE BOOKS AND PARTS PICTURED ARE INCLUDED IN SALE!! (The one owners manual, in the zip-lok bag in the center of the picture IS THE ORIGINAL, WITH THE TRUCK... sweet huh?)- AND the list goes on and on... PLEASE look at the pictures, and if ya have questions... PLEASE ASK.
SHE'S READY TO DRIVE ANYWHERE YA HAVE THE NERVETO TAKE HER... I DRIVE IT ALL AROUND TOWN, BUT I WOULDNOT DO A 100 MILE FREEWAY TRIP WITH HER... SHE'S LOW GEARED, EVEN IN "HI" REAR END, AND SHE'LL BEAT YA TA DEATH... I HAVEN'T DRIVEN MORE THAN 15 MILES AT 60 MPH. IF YA WIN THE BID... YOU CAN BE THE JUDGE
THE NOT SO GOOD STUF- SEAT UPHOLSTERY IS IN POOR CONDITION... SEAT FRAME IS SOLID WITH NO CRACKS OR BREAKS... BUT UPHOLSTERYIS IN VERY POOR CONDITION, CRACKING WITH HOLES (see pictures)- THE FLOOR MATS ARE ALSO IN POOR SHAPE ON DRIVERS SIDE, PARTS MISSING AND CRACKED RUBBER.... PASSENGER SIDE DRY AND HARD, WITH NOT MUCH FLEX LEFT AND NOT BROKEN.... YET.- THERE ARE SOME DENTS HERE AND THERE, BUT NOTHING DISASTROUS.- HOOD SIDES, FORWARD, HAS SMALL AREAS OF RUST/ROT BOTH SIDES (see pictures)- FENDERS HAVE A COUPLE SMALL AREAS OF RUST/ROT, LEFT ON LOWER REAR PART OF FENDER, RIGHT ON VERY HIGHEST PART OF LOWER FENDER EXTENSION AREA.(see pictures)- LEFT DOOR HINGE IS MISSING "DOOR OPEN STOP" TO PREVENT FORWARD PART OF DOOR FROM HITTING FENDER, so be careful WHEN YA OPEN THE DRIVERS DOOR, don't want ta make any more dents than ya already have!(2 NEW (left and right) TOPhingesINCLUDED with sale. ALL hinges are tight with NO SAGGING, just got 2 new top ones so they would have the "Door Open Stops" new, and functional on both doors!)- THERE ARE A FEW BODY "DRILLED HOLES" HERE AND THERE FOR WHAT-EVER YEARS AGO (Not welded in yet as I haven't gotten to the body work yet... don't want ta fill something I will need later)- FRONT END WANDERS SOME, BUT IS CONTROLLABLEWITH NO SHACKING OR BOUNCING (Just don't want ya ta think it steers like a "NEW" truck... I haven't gotten ta ball joints, pins and "steering box" ..... or EmergencyBrake yet)- Again, PLEASE look at pictures and PLEASE ASK ANY QUESTIONS ya may have.- IF ya want a picture of somethin' I didn't include PLEASE Ebay Email your phone number and I WILL "Text" you the pictures ya need. She's right her in my driveway so it's no big deal!!!- If ya don't see it... ASK FOR IT, Ebay only lets ya put 24 pictures on.... I know, sometimes that's NOT enough!
LOOSE (INCLUDED but not installed yet) PARTS
THE SHORT LIST.... (INCLUDED, butnot installed yet)
- NEW BATTERY BOX- 2 NEW TOP DOOR HINGES left, right, upper.- NEW WINDOW CHANNEL FELT KIT FOR BOTH DOORS- NEW FRONT SIDE MARKERS AND FRONT TURN LENSES. (original ones not cracked or broken and still good, but a little faded)- NEW PADDED DASH with HARDWARE still in the box.- AND other parts I'm sure I have forgotten about and not listed. (see pictures, everything I have for this C-50 is laying there)
ALL THESE PARTS ARE NOT INSTALLED ANDARE INCLUDED IN THE SALE PRICE.... I ONLY HAVE ONE C-50... AND IF SHE'S GONE, I DON'T NEED SPARES.NOTICE >>>> SPARE PARTS SHIP IN BOXES ON PASSENGER SIDE FLOOR-BOARD OF TRUCK CAB.... DRIVER SIDE WILL BE EMPTY (NO BOXES) so still drive-able. PLEASE MAKE SURE YOUR TRANSPORTER IS "O.K" WITH THAT.... SOME WILL NOT ALLOW IT.NOTICEIF YA OPT TO CHOOSE A TRANSPORT THAT WILL NOT LET US LEAVE BOXES IN THE CAB.... YOU WILL HAVE TO PAY THE SHIPPING OF PARTS.... IF YA WANT THE PARTS.... YOU HAVE BEEN NOTIFIED.
NOTICE..>>>>> NOT PART OF THIS AUCTION/SALE <<<<<BUT AVAILABLE FOR FREE IF THE WINNER WANTS THESE..WINNER MUST LET ME KNOW IF THEY WANT THESE WITHIN 48 HOURS OF WINNING, AND REMOVE THEM FROM MY PLACE WITHIN 14 DAYS OF AUCTION END..... IF YA DON'T TELL ME YA WANT THEM.... I WILL ASSUME YA DON'T WANT THEM AND I WILL DISPOSE OF THEM and they will NOT BE AVAILABLE ANY LONGER.... ALSO, IF NOT PICKED UP AS PLANNED....They WILL be disposed of and not availableany longer.
I still have the 6original 20 x 6 split wheels, "widow makers" with rottentires on them if ya want them...But, IF YOU DO WANT THEM...BUYER WILL BE100%RESPONSIBLE FOR LOADING AND TRANSPORTATION OF THESE OLD WHEELS AND TIRES...separatefrom transportation of the truck....and I will not stack them on the frame of this C-50... WHY?.. for sure, they will screw up the paint, side boxes and whatever else they come in contact with... plus they are VERY HEAVY6 OLD ORIGINAL 20 X 6 SPLIT RIMS AND OLD TIRES, IF YA WANT THEM... AS STATED ABOVE... YOU ARE 100% RESPONSIBLEFOR LOADING, TRANSPORTING AND COST OF MOVING THEM, NOTHING WILL BE SHIPPED ON THE FRAME OF THE C-50, TO PREVENT ANY CHANCE OF VEHICLE DAMAGE.
THE HISTORY(Ya don't have ta read all this part... it's just a little history, of why I have her.... and why she's up for sale now...)Back in 1967 my Buddy's Uncle owned a little gas station and feed store in a little (back then) town of "Poway, California" (On Midland Road) that we worked part time for. He purchased a brand new 68 Chevrolet C-50 Flat Bed equipped just like this one, extra spring pack and all. We were both 19/20 then, and he sent us out to the valley to pick up a load of hey. We asked him, how many bales he wanted....He told us "Load her up... full! she's NEW and she'll hold it", gave us some cash and sent us on our way. WE HAD A "BLAST" driving that truck out to the valley... real "bouncy" but fun. Got ta the Alfalfa loading area (the sun was just comin' up and ya could smell the sweet smell of the fresh cut Alfalfa fields) and loaded her up... maybe to much.... but he was right she held it good. WELL, on the way back we had some steep, narrow roads ta climb... with the hill on the right side and the canyon on the left, we went up the hill, a little slow and the truck tipped over (way top heavy) on a right curve heavilybanked (goin' to slow I guess, huh)... the truck just slowly leaned over onto the bank... and the hey stayed on and laidon the bank first... so nobody and nothing was hurt... except our "pride". Of course... no cell phones back then, so someone stopped ta see if we were ok... no truck damage, no personal injuries to us... just all laid on the side of the hill... stopped... so he took my buddy ta the next town, a little (back then) town of "Julian, California" and called CHP and his Uncle... (Oh BOY!)... CHP got us a tow-truck and backhoe ta get us up-right again, and got us to a, somewhat level "Wide Spot" in the road... then we had ta wait for his Uncle ta get to us (a couple hours) with his old (1953) flat bed Chevy truck ta get the new one out of "top heavy mode", and naturally, get a butt chewin' from the CHP. No ticket.. just a real good chewin'.... and back then... they were good at it too! A couple hours later his Uncle showed up, he made sure we were ok and checked his NEW TRUCK... Then we got another REAL GOOD BUTT CHEWIN' (again? OH BOY) and we moved some hey bales off and onto the old truck.. CHP left and we proceeded back ta Poway, safely, with no more problems. Un-loaded both trucks (in the dark of night) and had a few laughs. Quite the day, never will forget that day!
Anyway, so many memories of that C-50 and all the good (and crazy) times we had in it... I came across this C-50 in Southern California and just had ta have it, got it home to here in Concord, California and been fixin' it up ever since.... and still havin' fun.
I am at a point where I love this truck "somewhat original"... but have the urge to re-build the original motor a little "hopped up", or put a big, bad hot rod motor in it, or just leave it as is and drive it 'till it dies (heck,the way these older trucks were built, I may die before it does... That's a BIG huh, huh?)... then replace it completely (but I hate ta loose the original 4 bolt main 327 that way!)....decisions, decisions, decisions... huh...???
AND NOW the misses is getting tired of the mess, and delays, and what she calls "wastein' time".... (HUH!.... I say softly...) and wants this project gone... "here we go"... no sense inresisting... I'll never win.... NEVER have, NEVER will... Ya MIGHT THINK ya WON... But later.... ya KNOW YA LOST!.... RIGHT?!.... sothis GREAT C-50 is up for sale.
So now ya know.....
PLEASE LOOK AT THE PICTURES CLOSELY... AND, IF YA HAVE ANY QUESTIONS... PLEASE ASK, I am sure I have forgotten ta put somethin' in this auction ad.. BUT, I DO have the answers for ya, and I will answer as soon as possible... with NO B.S.... Just straight answers!
Again, PLEASE ASK ANY QUESTIONS you may have about this 1968 Chevrolet C-50!
The transportation set-up and transportation cost of this 1968 Chevrolet C-50 is the sole responsibility of the winning bidder (WINNER/BUYER)... I can help with loading the TRUCK... (NOT the 20 x 6 "widow makers" wheels and tires) if necessary... no problem!
IF YOU ARE SHIPPING THIS TRUCK... IMPORTANT NOTICE...PLEASE READ!This 1968 Chevrolet C-50 is NOT THE SAME DIMENSIONSAS A "REGULAR" LARGE PICK-UP TRUCK and may need "special" handling... or... maybe not... you be the judge....dimensionsare as follows:TOTAL LENGTH (furthest point front to back) 18' 11" (227 inches)TOTAL WIDTH (at widest point, outside of dual tires) 7' 6 1/2" (90 1/2 inches)TOTAL HEIGHT (to top of exhaust stacks, NOT removable) 8' 8" (104 inches)IF YA WANT TO HAUL IT YOURSELF, A STANDARD 8' WIDE, FLAT BED AUTO TRANSPORT TRAILER WILL WORKThis 1968 Chevrolet C-50 is sold AS IS, with NO WARRANTY, WRITTEN or IMPLIED what so ever.
This 1968 Chevrolet C-50 is also for sale locally, and I reserve the right to cancel this auction at any time.NOTICE>>>> MANY of my listings end up sold locally so please bid as you want, just don't be surprised if she's taken off auction early.... it happens more often than not.
BID WITH CONFIDENCEPlease check my more than 2000+, 100% POSITIVE FEED-BACKYOU WON'T BEDISAPPOINTEDand... HAVE FUN FRIENDS!

• Make: Chevrolet
• Model: C50 C10 C20 C30
• Type: Cab & Chassis
• Trim: TRUCK OTHER
• Year: 1968
• Mileage: 27,897
• VIN: CE538J141XXX
• Color: VARIES
• Engine size: 327 CI
• Number of cylinders: 8
• Fuel: Gasoline
• Transmission: Manual
• Drive type: RWD
• Interior color: TURQUOISE GREEN
• Drive side: Left-hand drive
• Vehicle Title: Clear
Want to buy? Contact seller!