1954 Chevy Belair Project

1954 Chevrolet Bel Air/150/210

One of a kind 1954 chevy belair project.Guarantee that you will never see another one like this. All the hardwork and Fabrication is done, just needs someone to complete. Lot of love and workmanship went into this project, I just no longer have the time available to work on it. Rather see it goto someone who appreciates whats been done and completes it. This car will be insane when finished, Make one amazing Ride!!
Body is in bare metal and is super clean and straight.Mods consist of shaved dash, door handles,door locks, emblems etc..Hand made 1955 chevy headlights, mated to 1955 chevy bezels that flowinto the stock 54 fenders. The Rear tail lights are scratch built and modeled after the stock 1954 chevy housings. All finished in baremetal (No Surprises). Car also comes with a hood if desired to use. Hood has been seam welded, shaved smooth and peaked
The frame and suspension have been heavily modified and in order for this car to fully lay out on the body rockers, also with functionality in mind. This car was designed to be able to drive an inch or so off the ground if desired with the car's Engine and transmission being raised up with custom made mounts, K member etc.. There has been no channeling of the stock floor.
Frontend suspension consist of a Fatman UltralowMustang II, slam specialties airbags, disc brakes, polished stainless Arms etc...Rear suspension consist of GambinoTail dragger kit, Custom made Bridge and Frame Notch, triangular 4 link mated to Tri5 Chevy reared.
All seats have been custom made and modified to fit modified driveline tunnel.
In order to keep firewall shaved clean Car Features a Krugel under the dash brake booster/ master cyl pedal assembly.
Motor consist of a SBC 350 mated to turbo 350 trans with Lokar shifter. Real genuine antique Edelbrock X1 manifold with 6x2 Stromberg 97 carburetors, custom aluminum tear drop scoops, finned aluminum water pump, stainless headers. Custom madeGriffinaluminum radiator
Brand new chrome steelies, New Firestone 670 whitewalls,Mustang Gas tank, 15 correct sized 54 chevy grill teeth added.
Im sure there much I forgot to list. So much work and custom fabrication has been done to this car. All fabrication is complete.This Car is a project and sold as is, no warranty expressed or implied. Car is not running and basically rolling in a mock up phase. Car still needs all mechanicals gone through, seals, wiring, plumbing, glass, air management system, misc parts etc... Basically all hardwork is done and assembly is needed. Title is clean and current. Car is located in Northern California. I also have the right to end auction early if necessary.Buyer is responsible for pick up, tow or shipping.Buyer to pay $500.00 Deposit through PayPal within 24 Hours of Auction End
You can also see HD Video of the car through following link:
https://www.youtube.com/channel/UCDwTsYoLjqiwBSknJt0Mfrg

On Feb-25-18 at 13:47:03 PST, seller added the following information:

One of a kind 1954 chevy belair project.Guarantee that you will never see another one like this. All the hardwork and Fabrication is done, just needs someone to complete. Lot of love and workmanship went into this project, I just no longer have the time available to work on it. Rather see it goto someone who appreciates whats been done and completes it. This car will be insane when finished, Make one amazing Ride!!
Body is in bare metal and is super clean and straight.Mods consist of shaved dash, door handles,door locks, emblems etc..Hand made 1955 chevy headlights, mated to 1955 chevy bezels that flowinto the stock 54 fenders. The Rear tail lights are scratch built and modeled after the stock 1954 chevy housings. All finished in baremetal (No Surprises). Car also comes with a hood if desired to use. Hood has been seam welded, shaved smooth and peaked
The frame and suspension have been heavily modified and in order for this car to fully lay out on the body rockers, also with functionality in mind. This car was designed to be able to drive an inch or so off the ground if desired with the car's Engine and transmission being raised up with custom made mounts, K member etc.. There has been no channeling of the stock floor.
Frontend suspension consist of a Fatman UltralowMustang II, slam specialties airbags, disc brakes, polished stainless Arms etc...Rear suspension consist of GambinoTail dragger kit, Custom made Bridge and Frame Notch, triangular 4 link mated to Tri5 Chevy reared.
All seats have been custom made and modified to fit modified driveline tunnel.
In order to keep firewall shaved clean Car Features a Krugel under the dash brake booster/ master cyl pedal assembly.
Motor consist of a SBC 350 mated to turbo 350 trans with Lokar shifter. Real genuine antique Edelbrock X1 manifold with 6x2 Stromberg 97 carburetors, custom aluminum tear drop scoops, finned aluminum water pump, stainless headers. Custom madeGriffinaluminum radiator
Brand new chrome steelies, New Firestone 670 whitewalls,Mustang Gas tank, 15 correct sized 54 chevy grill teeth added.
Im sure there much I forgot to list. So much work and custom fabrication has been done to this car. All fabrication is complete.This Car is a project and sold as is, no warranty expressed or implied. Car is not running and basically rolling in a mock up phase. Car still needs all mechanicals gone through, seals, wiring, plumbing, glass, air management system, misc parts etc... Basically all hardwork is done and assembly is needed. Title is clean and current. Car is located in Northern California. I also have the right to end auction early if necessary.Buyer is responsible for pick up, tow or shipping.Buyer to pay $500.00 Deposit through PayPal within 24 Hours of Auction End
You can also see HD Video of the car through following link:
https://www.youtube.com/channel/UCDwTsYoLjqiwBSknJt0Mfrg

• Condition: Used
• Make: Chevrolet
• Model: Bel Air/150/210
• Year: 1954
• Mileage: 0
• VIN: 0971932f54z
• Color: Bare metal
• Engine size: SBC 350
• Number of cylinders: 8
• Fuel: Gasoline
• Transmission: TH350
• Vehicle Title: Clear
Want to buy? Contact seller!