1969 Camaro LS3, DSE pro touring

1969 Chevrolet Camaro LS3 DSE ring brothers, A/C P.W best money can buy

I was driving this car for 6 years. Then I wanted to build a pro touring monster. So I pulled stock engine, trans, subframe, front seats, stock wheels and tires and sold them.
THIS IS A PROJECT.
These pictures are of the car before I removed the stock parts. It is not running, but I can make it a roller.
**Just had the DSE mini tubs professionally installed.** Body shop also fully smoothed the firewall.Ride Tech 4 link is fully welded in as well. So rear end is done. It is getting the underside sand blasted and painted body color this weekend Or black or what ever color you want.
GM Crate LS3, trans, belt set up, brakes installed on DSE clip. Ready to bolt in. Everything new with paper work.
I have a 1969 Camaro. Black Standard interior with factory center console.Very clean car.
I have receipts for every part listed below. Over $65k in receipts. I had no budget when building this car.And Just bought another $9,000 worth of parts, see below.
*G.M crate LS3 480 hp. #19301358 (Installed in the DSE Clip.)*T56 gto 6 speed. All rebuilt with paper work. (Installed in the DSE Clip.)*LS7 complete clutch kit. With flywheel. (Installed in the DSE Clip.)*Holley 302-2 LS oil pan. (Installed in the DSE Clip.)*DSE Billet LS motor mounts. (Installed in the DSE Clip.)*GM throwout out bearing. (Installed in the DSE Clip.)*ARP clutch and bell housing bolt kit.(Installed in the DSE Clip.)*ATS Speed-tech T-56 transmission cross member.(Installed in the DSE Clip.)*Speed-Tech tunnel raise metal kit.*DSE Hyrofomed subframe complete assembled and coated. # 032004S* Ride tech 4 link.*DSE mini tub kit part # 040401. (Installed.)*DSE fire wall plate, part # 010901.(Installed.)*DSE LS3 headers.*Rain Gear hidden wiper kit. *Ring Brother Billet air space hood hinges, black.*Ring Brother trunk hinges. Black. (Installed.)*Forge Line GA3C 18x10 and 18x12 wheels and tires. I have another set of wheel, all billet if you prefer.*Bear 14" 6 piston disc brake kit for front, part # 4301352B. (Installed on the DSE Clip.)*Vintage A/C kit- complete kit for 69 Camaro.*Ididit tilt column (black).*Budnik steering wheel.*Fesler Billet outer door handles.*Fesler billet side marker lights.*Fesler billet R/S tail lights.*Fesler Led R/S tail light assemblies.*Ring Brothers billet door sill plates.*Ring brothers billet door vents.*Ring brothers billet door strikers.*Ricks EFI, mini tubed stainless gas tank with pump and sender.*G.M Power trunk lock kit. Installed.*Electric Life power window kit with harness and switches. front part # GM89-6869-K, rears GM104-6769-K and harness and switch# ELI-4990-50-356.*TMI black suede 1 piece head liner kit.*TMI deluxe carpet kit. Black*TMI reclining seats, all done, bolt in TMI part # TIP 12017072 bolt in bracket # TIP 12017082. I think those are the summit racing part #s from when I ordered seats.*Fesler billet Black big block fender braces.*Fesler Black hood latch.*New black A/C dash pad.*Griffin LS3 alum. raditor and fans.*Clayton billet Clutch and brake pedals.*Ring brother hood adjusters.*DSE smooth firewall a/c mounting bracket kit.*Auto Wire complete car wire harness.*Mosser 9" rear end with 4:11 posi, shorted to DSE specs.(54.75") Power coated and brackets welded on. Powder coated.*G.M Performance stand alone complete LS3 480 hp. wire harness and needed sensors and ECM. *Dakota Digital VHX gauges. Black back ground, white needles.*New gauge bezel.*2 boxes of Dynomat.*TS -The Shop LLC custom rear package tray.*The Shop LLC custom kick panels wrapped in leather.*Complete R/S front grill change over.*FlowMaster 3" complete exhaust kit all the way out the back.
-Boxes full of misc. parts.
Way more parts then listed.
Location San Jose CA
I WILL NOT PART THIS OUT.
I will make the car a roller, Body shop will paint the underside of the car Black or any color you want if we come to a price before. The rest of the parts, I should be able to get inside the car for shipping. Good thing is all the glass is in the car and everything worked before I pulled it part. So I can lock up all the parts inside the car.
Stock standard interior is still in the car. (stock front seats are gone. ) Factory black rear seat is still there and in great shape. Factory dash pad still installed, stock head liner is still installed and in great shape.
Might trade for Bel Air or corvette, C10Sieera

On Dec-04-17 at 21:51:29 PST, seller added the following information:

Clean, Clear CA title in my name. Current registration. Car was 100% complete and driving 3-4 weeks ago. Body panel wise. Floors and trunk are perfect, original. All other sheet metal is original except lower driver rear quarter panel, appears to have had a small section replaced about 20 years ago. hood is after market and fits nice. Car was painted 20+ years ago. Looks great, but not a show car.
Vin tag is original and never touched.Hidden vins are all present. Very low miles car. Found build sheet under gas tank.
Parts I haven't made up my mind on yet and still needed.-Rear brakes. I was waiting until my rear-end came in. It is here now. All powder coated and assembled.-Fuel line. I have fuel filter/ regulator kit. I also have $300 DSE fuel tank carbon vent.-Some type of brake master cylinder and hydro boost or booster. I have the original master and booster in a box with the rest of the stock take off parts.
I have pictures of the underside of the car now, from body shop today. They have the mini tubs fully installed and seam sealed in. Under side of car is stripped and 4 link is welled in. They are going to install Speed Tech T56 tunnel this week and get ready to paint the underside of the car. I had bought 2 tint-able bed liner kits and they were going to tint it to the body color of my choice. Or they can do black, or just paint it satin black.I will then need 2 days to hand the front sheet metal and install the rear suspension and front sub frame. Then the car is ready to go. It will be a roller. I have 2 sets of wheel s and tires. Take your pick.

On Dec-04-17 at 21:57:11 PST, seller added the following information:

Also included, not listed is a G.M performance belt kit for the GM crate engines. Installed on engine already. Also have a new in the box Power Master starter. I have so many parts, it is hard to list them all. But I will keep adding to listing as I find more.

• Condition: Used
• Make: Chevrolet
• Model: Camaro
• Type: Coupe
• Trim: LS3 DSE ring brothers, A/C P.W best money can buy
• Year: 1969
• Mileage: 0
• Color: Blue
• Engine size: Ls3
• Number of cylinders: 8
• Fuel: Gasoline
• Transmission: Manual
• Drive type: RWD
• Interior color: Black
• Vehicle Title: Clear
Want to buy? Contact seller!