1965 SHELBY COBRA STYLE 427 ROADSTER CSX 3169

1965 Shelby Cobra

What you get:

A Million - Dollar High Performance Vehicle for A FRACTION of the price!

Completely assembled 1965 SHELBY COBRA STYLE 427 Car

When we say everything, we mean it. We include things like hood hinges and a

complete custom chassis wiring harness. We also make it easy for you to use

the engine of your choice with a variety of available headers and

engine/transmission mount assemblies.

Frame:

Complete jig-welded original style 4” round tube frame. Includes all mounts ready to accept small

block Ford and 1987-2004 Mustang running gear. 1965 SHELBY COBRA 427 can be ordered to accept

a wide variety of engines/suspensions.

Includes 3-point roll bar, powder coated gloss black

Includes passenger side roll bar mounts Chassis, powder coating optional

Body:

Hand laid 3/16” laminate composite body and panels made with vinylester resin. Driver and

passenger doors with molded door liners and integral steel door frames

Hood with molded hood liner, and separate hood scoop

Trunk with molded trunk liner and improved mount face for license plate light

Includes secondary body fasteners

Adhesive backed and foam weatherstrip

C-channel door edge trim and fasteners

Plastic end caps and body fasteners

Trunk and engine bay seal, push on rubber bulb seal

Rubber hood and trunk bumpers

Includes multi-adjustable door hinges with bronze bushings and fasteners

Includes adjustable hidden trunk hinge 1965 SHELBY COBRA 427, hinge mount plates and fasteners

Includes hood hinge 1965 SHELBY COBRA 427 with hydraulic piston supports and fasteners

Original quick-jack comp bumpers with stainless steel sleeves and fasteners

Chassis Aluminum Panels:

Includes over 40 laser cut, pre-formed 6061-T6 aluminum panels for cock pit, trunk, and engine bay.

1,200 pre-packaged rivets; 1/8” and 3/16” short and long

Complete quality cockpit aluminum with optional block-off plates and covers

Engine bay aluminum assembly with aluminum nose sections and splash guards

Complete Front Suspension:

Unequal length A-arm control arms with coil-over shock suspension. Comes complete with all

components and fasteners.

KONI brand high-performance mono-tube, rod-end shock absorbers

Coil-over 1965 SHELBY COBRA 427 for KONI dampers including spring hat, threaded seat and 500 lb.

black powder coated springs

Adjustable upper control arms with ball joints and fasteners

Lower tubular control arms with ball joints and fasteners

Rear Suspension:

Our 3-link rear suspension option include rear axle brackets, fasteners and axle straps to mount your

Mustang 8.8” rear solid axle and brakes. Comes with all hardware required for installation.

FFR Deluxe 3-Link suspension 1965 SHELBY COBRA 427 with rear-end brackets, upper link 1965

SHELBY COBRA 427, and fasteners, including panhard bar 1965 SHELBY COBRA 427 with rod-ends

and grade 8 fasteners

KONI brand high performance mono-tube, rod-end shock absorbers

Coil-over 1965 SHELBY COBRA 427 for KONI dampers including spring hat, threaded seat and 350 lb.

black powdercoated springs

Factory Five tubular rear lower control arms with polyurethane bushings and fasteners

Or select our 2015 Mustang independent rear suspension option includes:

Welded tubular steel IRS frame

Upper and lower control arms with bushings, grease fittings, and fasteners, powdercoated gloss

black

Left and right IRS toe adjustment arms with rod ends and fasteners, powdercoated gloss black

KONI coil-over shocks with coil-over 1965 SHELBY COBRA 427, springs, and fasteners

Right and left CV axles

Rear wheel studs

IRS e-brake cable adapter

Differential mounting components, bushings, and fasteners

Driveshaft adapter for manual cast iron center section

Brake 1965 SHELBY COBRA 427:

SN 95 style spindles with integral upper ball joint mount and fasteners

Front hubs, fasteners and dust covers

Front Brakes, Ford Mustang GT 11” front rotors with twin piston PBR aluminum calipers, brake pads

and fasteners

Master cylinders (listed in pedal box assembly), stainless braided brake lines front with mount clips,

banjo bolts and brake line mounting fasteners

Pre-flared 3/16” brake line and brake line T-adapter

Complete emergency brake handle assembly with leather boot and fasteners

Complete Steering System:

Complete steering system using 15:1 manual rack from tie rod ends and fasteners to vintage steering

wheel and badges; collapsible design.

15:1 manual steering rack with inner and outer tie rod ends and fasteners

Polyurethane steering rack bushings and fasteners

Rack shaft adapter 9/16-26 spline

Nickel plated lower steering shaft (fully welded U-joints)

Collapsible upper steering shaft, with friction washers

14” vintage wood and aluminum steering wheel with boss and FFR center section and fasteners

Steering bearings and hardware, including flange bearing, pillow block bearing and fasteners

Complete Fuel System/Parts:

Based on OEM style fuel tank and system, this assembly provides everything from the gas cap to the

lines, and is designed to work with carbureted or fuel injected systems.

OEM style fuel tank with mounting straps and hardware, vents, gaskets, pick-up and fuel level

sending unit

Fuel lines, connectors, and filler neck

Pre-flared fuel lines (1/4” and 5/16”) with unions, barbs, hose clamps and high-press flex lines and

fasteners

Aston LeMans style polished aluminum fuel cap with integral pressure cap, gaskets, ground strap,

fuel hose to tank with fasteners

3/8” line, fuel filter, and connectors

Complete Cooling System/Parts:

Electric cooling fan and mounting hardware, radiator hoses, and fasteners.

Electric cooling fan and mounting 1965 SHELBY COBRA 427

Aluminum radiator with cap and in-line filler neck

Radiator mount 1965 SHELBY COBRA 427 and fasteners

Stainless steel radiator hose 1965 SHELBY COBRA 427 including adapter 1965 SHELBY COBRA 427,

fasteners and hose

Stainless overflow tank with cap, hoses, hose clamps and mounting hardware

185 degree thermostat switch and wiring

Engine Accessories/Side Exhaust:

The Mk4 base 1965 SHELBY COBRA 427 is configured to accommodate some big block Ford engines,

small block Ford windsor engines, and modular 4.6L and the 5.0L Coyote engine. 1965 SHELBY

COBRA 427 comes with alternate drive pulley assembly, oil filter relocate 1965 SHELBY COBRA 427,

and exhaust assembly to adapt Mustang engine and headers to vintage side exit exhausts.

4-into-1 side exhaust, bare steel with rubber hanger brackets, gaskets and fasteners

1987-1995 or 1996-1904 straight pipes

J-pipe header-to-side exhaust adapter, optional catalytic converter replaces this part. Full tubular

headers are also an available option

Oil filter relocate mount with fittings, hoses, barbs and fasteners

Spin-on engine block adapter

Alternate drive pulley, spacer, pulley wheel and fasteners

SB performance air filter, conical

A/C replacement pulley 1965 SHELBY COBRA 427 and custom length fan belt with fasteners.

Accelerator cable assembly:

Includes the cable, return spring and retainer

Optional full length tubular headers for: 302, 351, 390/427/428, or 5.0L Coyote

Optional catalytic converters for: ‘87-’95 302, '96-'04 4.6L 2V or 4V

Optional shorty headers with J-pipes for: 4.6L 2V and 4V, and 5.0L Coyote

Driveshaft:

Select from one of three available driveshafts with fasteners to match the engine/trans of your

choice.

Select one of the following:

28 spline 10.375” driveshaft for T-5 or Tremec 3550s

31 spline 10.375” driveshaft for Tremec TKO 500s or 600s

31 spline 12.875” driveshaft for 4.6L engines with T-45s or 3650s

Gauges, Dash, and Electrical Assembly:

End those wiring harness woes. Integrated harness and electronic gauges are just the start of this

massive assembly. Choose either vintage/replica or modern/performance gauges to complement an

authentic street style dash. Complete assembly comes with covered aluminum dash, dash buttons,

toggles and indicator lights, switches, and horn.

Qulaity pre-cut aluminum dashboard with fasteners

Padded dash cover, black vinyl

Custom fit chassis wiring harness

Ignition switch with FFR keys, headlight switch, three-position turn signal switch, starter solenoid

and horns

Red, green, and blue dash lights

Wiring harness mounting 1965 SHELBY COBRA 427 and hardware includes fuse panel mount

Insulated line clip hardware and fasteners

Cable ties, wire loom and flex grommeting

On/off switch, horn button, flasher and all connectors

Battery ground strap

Trunk mount battery hardware, cables and hold-downs with fasteners.

Speedometer sending unit, pigtail, fasteners and speedometer gear

Complete set of seven Autometer electronic gauges, with connectors, terminals and installation

1965 SHELBY COBRA 427, which includes the following gauges:

Speedometer (programmable)

Tachometer

Oil Pressure Gauge

Water Temperature Gauge

Fuel Level Gauge

Voltmeter

Oil Temperature Gauge

OR select optional complete set of seven vintage FFR replica electronic gauges with connectors,

terminals and installation 1965 SHELBY COBRA 427, which includes:

GPS Speedometer (reverse read)

Tachometer

Oil Pressure Gauge

Water Temperature Gauge

Fuel Level Gauge

Voltmeter

Clock

Complete Interior Accessories:

The 1965 SHELBY COBRA 427 ROADSTER CSX 3169 comes with all the interior accessories you need.

Authentic style seats, door latches, toggles, rear view mirror, and more complement the dash and

gauges assembly for a full interior that is period correct. Check out this full list of standard parts and

assemblies.

Authentic style roadster metal framed seats, black vinyl with fasteners

5-point Simpson brand harnesses. 3” wide driver and passenger, frame mounted with fasteners

Complete cockpit carpet set, black all-weather

Emergency brake boot, black leather

Authentic interior rear view mirror with fasteners

7-piece electronic gauge assembly

Original style door latches, fasteners and leather check straps

Authentic stainless shifter handle, shift knob, boot, polished ring and fasteners

Authentic 14” wood and aluminum steering wheel (listed in steering assembly), with polished

aluminum boss and small center badge

Exterior Accessories and Lighting:

Along with the goodies on the inside of the car, the 1965 SHELBY COBRA 427 ROADSTER CSX 3169 is

loaded with the right parts on the outside.

Authentic chrome-on-brass vintage windscreen, tinted with side bars and fasteners; DOT safety glass

compliant

Authentic style three-lock set including T-trunk handle, L-shaped hood handles, matching keys, cam

wedges, fasteners, latch pin sleeves and plastic end cap

Authentic license plate light and bracket with fasteners

Authentic style 3.5” Aston roller gas cap, polished cast aluminum with adaptor 1965 SHELBY COBRA

427 and all fasteners

Competition hood pins

High-quality laser-cut aluminum side louvers

Ceramic FFR badging nose and tail

Original style headlamp assemblies, including buckets, halogen headlamps, trim rings, and fasteners

Original style British front amber turn signals, and red rear tail-lights

All lighting is DOT-approved

Authentic bullet style sideview mirror

Complete Pedal Box and Components:

Leaving the Mustang pedal box behind, the complete MK4 1965 SHELBY COBRA 427 utilizes the

proven Wilwood brand pedal box with fasteners and all the required ancillary parts

Wilwood pedal box with adjustable pedals and mounting hardware

Master cylinders, clutch quadrant, clutch cable, threaded firewall adjuster

Accelerator pedal, accelerator cable, return spring and ball stud retainer, with fasteners

Brake line adapters and T-fittings

Oil Filter Relocater/Alternate Drive Pulley Assemblies:

An oil filter relocation 1965 SHELBY COBRA 427 comes with all hoses and

hardware. Other parts to help 302 EFI and Mustang engine users include:

Oil filter relocation mount with fittings, hoses, barbs and fasteners

Spin-on engine block adapter

Alternate drive pulley, spacer, pulley wheel and fasteners

Air filter, conical

Fan belt, six rib

Fasteners:

More than 1,500 top quality zinc plated, chrome and stainless steel USS and SAE fasteners,

numbered and packed individually by assembly.

Quality Roadster Complete 1965 SHELBY COBRA 427 the "Complete Car"

We will have:

A completedpackage from a A+++ Rated US Company

Procure crated V8 engine from blueprintengines.com,

Have Cobra Fully Assembled

Terms are $500 Immediate Non-Refundable Deposit

50% After 72 Hours, Final Balance Due Upon Delivery.

Complete Build will take 3-4 Weeks.

Allow 3-6 Weeks Delivery

Buy with confidence. We have been selling on Ebay for over 20YEARS and have a 100% Positive Rating!!!

Thank you for reading!

• Condition: Used
• Make: Shelby
• Model: Cobra
• Type: Sedan
• Year: 1965
• Mileage: 39,725
• VIN: 00000000000
• Color: Black
• Engine size: V8, 8 Cyl
• Number of cylinders: 8
• Fuel: Gasoline
• Transmission: Manual
• Drive type: RWD
• Interior color: Black
• Drive side: Left-hand drive
• Vehicle Title: Rebuilt, Rebuildable & Reconstructed
Want to buy? Contact seller!