1984 Oldsmobile Hurts 442 Very Clean Lightning rod shifter 1 owner

Price: US $7,999.00 Item location: Mantua, New Jersey, United States
Description:

1984 Oldsmobile 442 Hurts / Old

1984 Oldsmobile Hurst 442

w/LightningRod Shifter

1 owner

68K original Miles

Delaware Clean title in hand

Runs / Drives 100%

Clear coat on top roof hoodand trunk faded. Paint on sides in better shape.

Cars alloriginal

Interior very clean

New Exhaust System

Call or text Mike @ 856-498-8493 w/any questions

See brief history of the hurst olds


The 1983-1987 Oldsmobile Cutlass/Hurst was a late-'80s revival of the mid-size muscleOldsdeveloped by Hurst Performance Products. Issued on the 15th anniversary of the original Hurst/Olds, the series was marketed by Lansing as an adjunct to the standard Cutlass line.

The 1983-1987 Oldsmobile Cutlass/Hurst was based on the downsized 1978-vintage A-body Cutlass notchback coupe and featured the expected suspension upgrades plus a black-over-silver exterior with red accent stripes, spoilers front and rear, buckets-and-console interior with extra gauges, and tuned four-barrel 307OldsV-8 driving a four-speed Turbo Hydra-Matic transmission.

A novelty was Hurst's "Lightning Rod" transmission selector with no fewer than three sticks: a stubby main lever and one auxiliary wand each for first and second gears. The latter allowed "slam" upshifts for maximum acceleration (recalling Hurst's "Slap Shifter" of the '60s).

That acceleration was pretty good -- about eight seconds 0-60 -- but the arrangement confused customers and was discarded for an orthodox single stick whenOldsrepackaged Hurst's concept as a new 4-4-2 for 1985. This was similar to the H/O but could be had with a less flashy monotone exterior and most all the luxury extras available on top-line Supreme coupes.

Canceled with the advent of a new front-drive Cutlass Supreme for 1988, and production was deliberately limited, but the H/Osand 4-4-2s are a respectable reminder of the good old big-inch days.

Specs:
Engine

Type V-8, iron block and heads, aluminum intake manifold

Bore x stroke

3.80 x 3.385

Displacement

307 cu. in., 5 liters

Compression Ratio

8.0:1

Carburetion

1 x 4 Rochester 4MVQuadrajet

Emission controls

monolythicbed catalytic converter
feedback fuel-air-ratio control
EGR
auxiliary air pump

Valvetrain

pushrods, overhead valves, hydraulic lifters

Power (SAE net)

180 bhp @ 4400 rpm

Torque (SAE net)

245lbs-ft @ 3200 rpm

Exhaust System

low restriction dual outlet, mufflers

Fuel requirement

Unleaded

Drivetrain

Transmission

4-spd. automatic with lockup torque converter, 2400 rpm stall speed

Final drive ratio

3.73:1 (limited slip optional)

Transmission gear ratios

I 2.74
II 1.57
III 1.00
IV .67

WOT upshift

1-2: 5200 rpm
2-3: 4900 rpm
3-4: 4400 rpm

Suspension

Front

Independent, unequal length control arms, coil springs, anti-sway bar (1.25 in. diameter)

Rear

rigid axle, 4 trailing links, coil springs, anti-sway bar (.875 in. diameter), Delco Super Lift adjustable shock absorbers

Steering

Type

Recirculating ball, power assisted

Ratio

12.70:1

Turns lock-to-lock

2.5

Brakes

Front

10.5 x 1.0 in. vented disc

Rear

9.5 x 2.0 in. cast iron drums

Wheels and Tires

Wheel size

7.0 x 15 in.

Wheel type

stamped steel, chrome plated Super Stock

Tire make and size

Goodyear Eagle GT Steel Belted Radial, P215/65R x 15 WOL

Dimensions and Capacities

Wheelbase

108.1 in.

Length

200.0 in.

Width

71.6 in.

Curb Weight

3557 lbs.

Weight Distribution F/R

58.6%/41.4%

Fuel tank capacity

18.1 U.S. gallons

Chassis/Body

Type

full length frame with rubber isolated body

Body material

Welded steel stampings

Interior

Shifter

Hurst 4spd. Lightning Rods, floor console mounted, cable operated withbackdriveand park/neutral start provision.

Front seats

reclining bucket, cloth or vinyl upholstery

Gauges

85 mph (140 kph) speedometer with trip odometer, tachometer, oil pressure, fuel level, water temperature, voltage.