1994 Land Rover Defender 90 NAS Base Sport Utility 2-Door 3.9L

Price: - Item location: Tulsa, Oklahoma, United States
Description:

19940000 Land Rover Defender 1994 NAS D90 Soft Top

Im selling my NAS 1994 Defender 90 3.9 liter engine with 141K miles, ith an R380 transmission. Runs and looks fantastic. It is my daily driver. No mechanical issues.
This Portofinio Red Defender 90 is beautiful. The body and paint are in great condition. I have spent many thousands of dollars on upgrades and maintenance for this truck.
This truck is by far one of the most well put together trucks I have witnessed. It is a joy to own, nd attracts all kinds of attention.
If you are looking at purchasing a D90, nd this is within your budget, ou will not be disappointed with this truck. These trucks are getting harder and harder to come by, nd are increasing in value almost daily. This is an early 1994 Truck that has the very desirable rear lower horizontal bars for the roll cage.
It is unique, nd I will miss having something that very few have the opportunity to own.
I have compiled a list of upgrades and items of interest about this truck. (I'm sure there are more...I just don't remember it all.) I have also included pictures, s they tell more than words....
If you are looking to purchase and know what you are looking at...you can get an idea from the description below of what has gone into this truck. Good luck and happy bidding.
If you have questions, r need more pictures etc, ust contact me. You can also call 918-210-0651 to discuss the truck. I have video uploaded to photo bucket of the truck running.
The Goods.......
Interior/Exterior:
Excellent Condition/Like New Rovers North Soft Top w/Zip Out Windows for Belt Rail Style Attachment. Belt Rails are Installed on the Truck
Used Condition but fully functional Best Top Brand Surry Top (Great for Summer)
Raingler Brand Side and Rear Net/Curtains
Rare Mantec Snorkel (Fully Installed)
Optima Red Top Battery
New Fuse and Power distribution in Battery Box (See Pictures)
Upgraded Winch Power and Ground Leads routed through new rubber grommets in the Battery Box
Tuffy Locking Center Console with custom riser that includes 2 12v Power Ports
1 Rear 12v Power Port behind Passenger Seat mounted to the roll cage support
Rear Custom Made "Better than Tuffy" Locking cargo boxes that are mounted on the driver and passenger inner wheel wells of the rear tub.
New Factory Rear Space Cargo Space Matt
New Galvanized steel Rear Crossmember that has been professionally painted gloss black and has matching Driver and Passenger Bumperetts that protect the sides of the truck along with the rear quarter panels. It is the best looking crossmember I have ever seen on any Defender.
Receiver Hitch properly mounted to rear crossmember.
Rockware rock sliders that are tied into the Chassis
Access panel added for fuel pump
Kexby Seat Covers for Both Front Seats and Rear Bench SeatNew aluminum dash support (This replaces the commonly cracked plastic dash support you will find on these trucks)
New dash plastic, nstrument surround with all new VDO Gauges installed.
New heater blower motor.
Aluminum Kick Plates for both Driver and Passenger Side. (Replaces the cardboard plates that would fall apart the first time they got wet.)
New Side Marker Lamps both Front and Rear
Safari Gard Winch Bumper that is properly mounted
Super Winch that is wired properly w/control, airlead, nd upgraded cable termination point. (Includes Lucky 8 Coupler)
KBX LED Tail Light Upgrade w/two LED Reverse Lights. This includes the KBX Plinth Surrounds that hold 3 Lights each, nd a Reflector. Proper relay installed that makes them blink normal along with NEW Hazzard Switch.
Almost all new grade 8 hardware for roll cage. The Lower Innter Fender Cage Supports were replaced with new ones at the same time the heater blower motor was replaced due to corrosion.
I have also replaced the half doors with NEW 2012 take off full doors with roll up windows and speaker surrounds. This is a huge upgrade for a soft top D90. (Latest Factory Hinges and Mounting Hardware were used when replacing the doors.) So no rust stains or drips from the hinges. (The entire outside of the truck aside from the bonnet has been resprayed to the inside of the rear cappings. This was done to match the paint to the doors.hinges and take care of any body work/corrosion that was needed to get the truck back in top shape.)
Includes the upgraded from 1994 factory 1995/1997 door checks with plastic covers.
Tons of bolts replaced with Stainless Fasteners
Mud UK Drivers Seat Riser
New Factory Land Rover Seat Box Cover/Puma Style (Not Installed, ut included with the vehicle)
Black 5 Bar installed on Bonnet
Machined Aluminum, nodized Black Vent Intake on Passenger Wing
Custom Rear Tire Carrier made for Oversized Rear Spare, ncludes Built In High Lift Jack points, ear Deck for Jerry Cans/Cooler, tc. This Tire Carrier has upgraded hardware that allows it to swing away with the Rear Gate, ust like the factory Soft Top gates, owever; includes an more secure/anti-rattle lock, ashioned to the Rear Cross Member. Mounted using Stainless Hardware.
A custom 3rd Brake Light Bar, hat is extended for use with Oversized Rear Spare
Safari Gard Backup/WorkLamp/CB Antenna Mount w/Backing Plate Installed.
Rear Bench Seat installed with factory mounting hardware, ear Seat belts and Factory Original Rear Female Connector for Rear Seat Belts.
Alpine CD Player/w/Kicker Brand Subwoofer that sits behind the rear bench seat. Has QD Disconnects for easy removal if needed.
Underneath:
5 Absolutely Like New BF Goodrich MT's on New LR Steel Wheels (Size 255/85R16)
New Poly Bushings all the way around
Both axels sewer caped with rovertracks brand covers
Heavy Duty Steering Arms
Offset Tie Rod
Curvered Pitman Arm combo from Rockware and Rovertracks
Equipe Trailing Arms
Great Basin Third Members with Detroit Rear, nd a Trutrac Font
4.11 Gears
Great Basin Heavy Duty Rear Axels
Rovertracks Heavy Duty Front Axels with Longfeld CVs
2inch OME Lift Springs with Terrra Firma Upgraded Shock Towers/Supports
Terra Firma Remote Reservoir Shocks
Newer Fuel Tank Skid Plate
NRP Full Exhaust
Expedition Exchange extended brake lines.
Recent work New belts, ew rear oil seals, ewer U-Joints, One Shot filled in each of the front swivels. Recently replaced the fuel pump, ew clutch master cylinder, ew rear brakes, nd some newer brake lines.
Braided Oil Cooler Lines Installed. This is a must for any Defender, egardless if you purchase this one or not. Upgrade you lines.
The Bads....
Things I just didn't get around to having fixed or replaced that I think need attention.
There is a very, nd I mean very minor ding on the passenger side of the Bonnet. A painless dent guy would probably charge 50.00 to remove.
There is corrosion on the under tub support bar and it should be repaired or replaced. ( These sell for around 275.00, ut require some work to install )
The C-Pillar footings are missing some rubber at the feet, nd the feet have corrosion that has been removed and covered with black paint. (POR 15) I was quoted at 250.00 to have my body guy fabricate the feet and install them on the C-Pillar. (C-Pillar is the Rear Roll Cage Hoop.)
Plastic knob on passenger vent flap is cracked.