1967 International Harvester Scout 800 Restomod

Price: - Item location: Huntington Beach, California, United States

Description:

1967 International Harvester Scout

This is a RESTO - MOD build of a 1967 International Harvester Scout 800

I built in stages over the course of a few years. Im firm on my price as I have more than double into the build. My life has taken me down a different path and I need to let this build go on and hopefully the future owner will use it more than I have. I just don't have the time to drive it and hate seeing it just sit. It would make for a perfect beach cruiser.

The build was done by a good buddy of mine and well known Scout Guru... GARY BILLINGS, out of Conifer Colorado.

Lots of time and work went into removing and replacing all and all rust from the body and inner shell.

EXTERIOR

During this phase of the build we focused on frame and body and making sure everything was straight and true.
Body panels were removed from the inner shell and all rust repairs were made.
Front nose and hood were sourced and trued up
Fenders were sourced and welded back on
Doors were sourced and made true
Rear Fenders and end caps were sourced and welded back on
We also addressed the fuel system and the framing of the tanks aka inner and outer walls as well as floor for tanks.
New front floors both drivers and passengers were welded in
New rear floor plate also welded in
Then the vehicle was prepped and painted with POR15 and chassis paint.
Inner Shell was sprayed with POR15 chassis paint
Frame was also cleaned and prepped and paint with POR15 chassis paint
Body panels and undercarriage was cleaned prepped and sprayed as well
Wheel wells were sprayed with undercarriage coating
The exterior was done in Tan Durabak roll on liner.
The hard top was sandblasted and powder coated white, but over the last couple of years its gotten some surface rust near the windshield which can be addressed if you will... reflected in price.
All new window seals through out the Scout, but does still leak water during hard pouring rain. its a Scout they all leak
Rear tailgate is a drop down from 1961 (IH stamped in it instead of the Script)

was sand blasted and powder coated then line-x’d black

Hood was also sand blasted powder coated and then line x'd
Custom Front bumper fabricated by Gary Billings with KC lights mounted and D Rings welded for Shackles

Was sandblasted and powder coated in black fine texture

Custom Rear Bumper with tire swing out, jerry can and hi lift fabricated by Gary Billings (holds spare Interco Trxus 31”)

Was sandblasted and powder coated in black fine texture

Custom Rock Sliders fabricated by Gary Billings that are bolt on and the frame has been sleeved for added strength

was sandblasted and powder coated in black fine texture

Ford Wagon wheels were sourced and refinished by sandblasting and powder coating in Tan.
31x10.50x15 Interco Trxus Tires were mounted, they have maybe 500 miles on them. 5 tires

ENGINE / DRIVETRAIN AND BRAKES

Chevy 350 Crate motor
Edelbrock Carb
Valve Covers and filter cover powdercoated beige
Headers were Kyrocoated black
Chevy TH350 Transmission
Dana 20 Transfer Case
LoKar Automatic shifter kit
Custom Exhaust
Dana 44 (Scout 2) Front Axle with all new parts and axles 3.54 Gears
Brand new Warn locking front hubs
Dana 44 (Scout 2) Rear Axle with all new parts 3.54 Gears
New Rear Brake Shoes
Scout 2 Power Steering
Custom made steering links
Brand new Rancho Shocks
Brand new Rancho Steering Stabilizer
Brakes are C10 disc brakes
New Brake lines and hard lines
Astro Van Brake Master and Booster
Aluminum Radiator with electric fan
new Optima Red Top Battery in a Custom Fabricated battery tray by Gary Billings
Custom Motor Mounts and Trans Mounts Fabricated by Gary Billings

INTERIOR

The interior was then sprayed by line-x and everything that was removable was sand blasted and powder coated

- All chrome was done in fine texture black and accents were done in beige

The interior was then reupholstered in aged raw vinyl, for that waterproof but rustic look
Rear seat was sourced and redone as well
Sun-visors were also redone in the raw vinyl
The Lokar Shifter allowed for the shift to stay in its factory location and retained the factory boot for a very clean install
Dash was removed, sandblasted and powder coated in a hammered copper
Bezels were all cleaned and polished
Dash trim was sandblasted and powder coated beige
All dash knobs were sandblasted and powder coated black fine texture
Electric Windshield washer was installed and wired through a factory knob
Custom Beauty Bar is mounted inside which was Fabricated by Gary Billings

was sandblasted and powder coated beige

LED lights were placed under the dash to have interior lighting when needed
A security center console was fabricated by Gary Billings, can wire in a stereo in the cubbie as well, also features two cup holders and a cigarette outlet for charging a phone.

was sand blasted and powder coated hammered copper
an arm rest was upholstered to match the seats and sun visors

The needs attention:

does leak engine oil
does leak Trans fluid
Window trim felts and seals haven't been installed but I do have them
the top has that rust I mentioned above
we did find a pin hole rust spot near the accelerator when installing the crate motor last year WE DID address it and CUT it out and welded new section in and coated it but the area needs to be sprayed again by Line-X… again this fix has been reflected in the price
Fluids are clean and all there but its been getting minimal driving time so fluids would be something to address for peace of mind

I think thats everything, Ill add items as I remember them. Honestly too much was done to the Scout to get it to where it is now and lots of small things might have been missed. If you have any questions feel free to email and we can discuss.

There are two builds on BinderPlanet posted By Gary Billings which include pages and pages of the build thread. I believe they are called the 30 day Scout build and another 30 day scout build. There is tons of info on those two Build Threads so if I haven't covered anything they are likely mentioned within there.

Thanks for looking and if you'd let to set up a time to check it out then give me a shout and we can schedule a time. The truck is located in Huntington Beach, has Colorado Title and its clean and in hand.

Needs a good new home

Thank you!

Vehicle Details:

Condition: Used
Make: International Harvester
Model: Scout
Type: SUV
Year: 1967
Mileage: 2,000
Color: Tan
Engine size: Chevy 350 crate
Number of cylinders: 8
Fuel: Gasoline
Transmission: Automatic
Drive type: 4WD
Interior color: Black and Brown
Drive side: Left-hand drive
Options: 4-Wheel Drive
Vehicle Title: Clear

Want to buy? Contact seller!