1984 Ford F-150 XL
Truck was put together 2 years ago to drive every day.Now I am moving and can't take it with me.Has a 300HP 302 crate engine,alum. intake,carb and alum. radiator.It has less that 6000 miles on the engine. New clutch,master and slave replaced,rebuilt 208 transfercase. seals and gaskets in front and back rears.(3.55 gears).Had installed new rotors,rotor hubs,calipers,wheelcylinders and brakes front and rear.replaced all brake lines and hoses.Replaced gas tank,sender lines and filler hose. Replaced heater core, wiper motor,brake master,washer motor.Built new wiring harness to the rear of the truck. All of the typical frame issues that these trucks hav, have been fixed.Steering box frame fixed,replaced or rebuilt all crossmember, frame behind shock mounts and frame sections behind all if the spring hangers and new front spring buckets.It has a 4 inch lift with extended radius arms and 33x12.50x15s that are 2 years old and have 13/32 tread depth.Truck needs body work ie, cab corners and front floor work. Original flareside box has rust at bottom of pass wheel wells,under rail caps and sides where fenders mount.Wood floor is gone and has been replaced by a sheet of 1/8 inch steel done by owner before me. Everything on the truck works and drives very wel, was used every day. Have any questions just ask.