1931 Dodge Hot Rod - DH6 Street Rod, BBC
- Condition: Used
- Make: Dodge
- Model: DH6 Sedan
- Trim: Sedan - 4dr
- Year: 1931
- Mileage: 100
- VIN: N3551 129
- Engine size: V8 396 BBC
- Drive type: RWD
- Vehicle Title: Clear Want to buy? Contact seller!
1931 Dodge DH6 Sedan
1931 Dodge DH6 Sedan Hot Rod for sale
I’ve decided to sell my beloved 1931 Dodge Hot Rod – I am building something else and the money would surely help push that project along faster, but I am in not in a ‘need-to-sell’ position. The car and craftsmanship speak for itself and there are over 1000+ pictures of the build of this car which can be provided. I completed the build in November 2015. There is also a full build specification list with every part number ever needed to maintain the car. The car has also been featured on the cover of Jegs catalog (Jan/Feb 2016). The car has less than 100 miles on it, and ALL parts are either brand new or rebuilt.
1931 Dodge DH6 Sedan Hot Rod/Street Rodwith 396BBC, Muncie Trans & Hurst shifter, Ford 9” with coilovers and 3-link. Disc brakes on all 4 corners, Wilwood masters; chopped 4”, channeled 7”; suicide front end, suicide rear doors. Everything is either brand new, rebuilt, re-chromed in the US. Car was featured on the cover of Jegs catalog in Jan/Feb 2016.
Here’s the details:
Rebuilt 396ci BBC bored to 402ci
Rebuilt Rectangular port heads with roller rockers & roller cam, ball milled chromed aluminum tall valve covers and chromed aluminum breathers
Edelbrock Victor Ram 2-R Intake with rebuilt dual Holley 660cfm Center Squirt Carburetors with Carb spacer plates – Carbs were ported/polished and rebuilt.
Brand new clutch, flywheel, and slave cylinder (stainless braided line)
Brand new Wilwood master cylinder and pedal assembly
Brand new - Chrome alternator, distributor, coil, spark plus wires, water pump, chrome air cleaners, air filters, GM Mini starter, etc.
Brand new, custom-built copper radiator – 4-core; and Brand new Zirgo electric fan, Brand-new Aluminum Catch canister
Brand new remote mounted chrome high-flow fuel filter, high flow chrome fuel pump, Stainless steel hard-bent fuel lines, Edelbrock aluminum fuel splitter
Hooker Headers – Ceramic-Coated inside and out, Stainless Steel 2.5” exhaust tubing, Stainless steel V-Band clamps, Stainless steel Porter mufflers – 2.5” from collector back, dual exhaust
Rebuilt Muncie M-21 4-spd, 26-spline input, 32-spline output, (1970-1974, casting #3925661) with Hall Effect Speedometer component added
Hurst shifter and shifter assembly
Balanced driveshaft with Spicer U-Joints
Rebuilt Ford 9” ‘big-brake’ rear, 3.31:1 gear ratio – Disc brake Conversion with rear parking brakes
Brand new Wilwood 5.1:1 Pedal/Master Cylinder assembly – one master cylinder for front and one master cylinder for rear brakes
Stainless braided lines for connecting areas from hard lines to calipers and for rear movement (5 lines total)
Front Disc Brakes
Brand new rotors and material, replacement calipers, stainless braided lines
Rear Disc Brakes
Brand new Currie rotors and other material, replacement calipers, stainless braided lines
Lokar Parking brake assembly
Stock original 1931 Dodge DH6 wheels powdercoated black
Original, hard-to-find ‘DB’ hubcaps
Firestone 550/600 whitewall tires
Stock frame – boxed and smoothed with new steel added for strength and adaptability. Rear frame was chopped to achieve the frame drop, front frame has suicide spring perch. All mounts and steel is all brand new.
Adjustable Pro-Comp coilover shocks and 3-link with heim joints throughout
Smoothed stock axle with brand new friction shocks and Teflon shock material. Brand new leaf spring is powdercoated and setup in transverse-leaf style and works excellent
Rebuilt reversed Corvair steering box, brand new knuckles and u-joints, brand new heim joints, brand new steering bars (powdercoated), etc.
Brand new, chrome steering column with GM electrical connection – turn signals, hazards, etc.
Paint color is Passion Red (2-stage), a GM color, and is carried throughout the entire body, grille shell, headlights, and engine (engine is single stage).
All metal painted parts have been sandblasted, epoxy primered (3 coats), primered (3 coats), painted (3 coats), and cleared (6 coats).
Frame and engine are single stage though and have 3 coats each.
Body has been chopped 4” and channeled 7”; grille has been sectioned 8”
Undercarriage is rhino-lined over epoxy primer to prevent rusting of any kind and deaden road noise
Interior insulation is sprayed in over epoxy primer to prevent rust and deaden road noise
Firewall is new sheet metal to give the clean, flat appearance. Cowl vents are non-functional but are removable as access points for master cylinders and battery if needed. Floor is brand new sheet metal and steel frame.
Maple Wood on perimeter of top – stained in a cherry stain and polyurethane.
Battery – New Optima red-top, purchased July2015, installed Nov2015.
American Autowire wiring harness kit
Key start, turn signals, hazards, headlights, hard-wired battery maintainer connection, battery shutoff connector, stereo
RetroSound Stereo, Speakers, and iPod/iPhone aux connection
RetroSound Stereo with iPod/iPhone aux connection
Two 6x9 Speakers
3-1/8” – Speedometer (Hall effect electronic) and Tachometer
2-1/16” – Fuel Level, Oil Pressure, Voltage, Water Temperature
Chrome steering column, chrome steering wheel, chrome horn button
All door handles/window cranks have been meticulously re-chromed, all windshield components have been meticulously re-chromed as well, and windshield frame is brand new.
Custom door panels, seats, shifter/parking brake covers, and interior panels – all soft vinyl (look/feels like leather).
Custom trimmed Carpet throughout
Front seat buckets are custom ‘bomber-style’ seats with a twist. They are also painted in the same passion red color as the body. Front belts are aircraft style (stainless), rear belts are standard style
Brand new glass in front windows, rear glass, rear side windows. There are no windows in rear doors (have Plexi-glass pop-out partial windows though), front windshield is Lexan.
Door handles have been meticulously re-chromed
Flip out windshield, chrome windshield frame, hinge, and hardware
Beautifully chromed hood/grille ornament
ISSUES: Obviously no vehicle is ever perfect – here are the small issues that exist with the car
Inner door sills rub between lower inside door and door sills causing small blemishes to paint. Pictures of this can be provided, but the imperfection is small and does not affect form/fit
Lexan Windshield has very minor scratches which need to be buffed out
If there are any questions please ask. I built this car with the intention to never sell it, so great care was taken in ensuring every detail was perfect and it was just right.
PAYMENT NOTES: $1000.00 non-refundable deposit due immediately upon acceptance of offer (within 24hrs). This must be paid in person (cash) OR through paypal to my account, no exceptions. Remainder of money is due in the form of cash or certified bank check upon the date of vehicle pickup (we can organize this at my local bank to finalize paperwork and financials during their normal business hours). Pickup would need to be coordinated to be withinthe bank’s normal business hours.
Vehicle is sold as-is, no returns/refunds/warranties – please ask questions/inspect prior to purchase if necessary. I am very up front with vehicle condition and all specs and can provide additional pictures if necessary. It truly is a nice, award-winning hot rod/show piece.
NOTE: VEHICLE IS FOR SALE LOCALLY AS WELL AND I RESERVE THE RIGHT TO END THIS LISTING AT ANY TIME.
Ford, Chevy, Chev, Chevrolet, Dodge, Plymouth, Chrysler, Hot Rod, Rat Rod, Street Rod, Model A, Custom, Kustom