1969 Charger R/T 4 spd Project

Price: US $3,550.00 Item location: Gosport, Indiana, United States
  • Condition: Used
  • Make: Dodge
  • Model: Charger
  • Year: 1969
  • VIN: XS29L9B276443
  • Vehicle Title: Clear
  • Want to buy? Contact seller!

1969 Dodge Charger

You are bidding on my 1969 Charger project. I hate to let this car go but haven't had the time to finish. This Charger R/T 4 spd was original medium green metallic hardtop, with green interior. The car is not complete its missing its electrical system and door panels heaterbox, steering column, and various other things. I have a lot to get this project moving forward. I am even including my welding rig to help with the project.
The car has new quarters but I was planning to replace with full quarters from AMD. The Dutchman panel will need replaced, The previous owner capped over the old one. Also the rear tail panel will need replaced. I have an inner rocker panel from AMD that will need to be installed.
The car needs inner fenders welded in.The torsion bar crossmember is capped but I have a replacement if you want. A portion of the firewall had been cut out do to rust, have part to make patch from donor car .The doors, passenger fender, Hood all look good only needing minor repairs. Driver fender will need replaced.
I am including parts from a donor coronet that will help you along the way.These parts include but are not limited to: full floor pans, inner wheelhouses, frame rails front and rear (not needed), firewall, cowl upper and lowe, and inner fenders.
The door hinges have been rebuilt by SMS.I have a new body bolt kit from uscartoolz.VIN tag has been restored correct rivets are included.Grille is very nice original only needs paint.The Dana 60 included is date correct but will need gone thru.I have most of the vacuum headlight parts I think only need switch.I have 2 grille support frames and a NOS grille frame top, to make one.
I have a 440 block bored .03 over and 906 heads, Pistons rods, and crank. Not assembled. Also have 4 spd Trans but am missing bell housing.
The welder I'm including is a Millermatic 211 works perfect and has .023 wire I'll also throw in my body clamps and hammer and dollies.Also includes mopar car Dollie wheels to help move car around shop.
You are responsible for pickup or shipping this car, there are a lot of extras coming with so let your carrier know.
Deposit of $500 is required at auction close.
Please email questions I know I have probably forgotten something.